Package Dimensions:
Length: 51.00 cm
Width: 28.00 cm
Height: 9.00 cm

Item Type: Side Window Louver
Material: Carbon fiber
Fitment: Replacement for Mustang 2015‑2021

Features

1、Perfect Fitment: Rear side window louvers trim is a perfect replacement for Mustang 2015‑2021. 2、High Quality Mateial: Air vent scoop shades cover is made of high quality carbon fiber, lightweight, wear resistant, anti UV and durable. 3、3D Retro Design: 3D retro design enhance your car visual appearance and provide comprehensive protection. 4、Function: Side window louvers keep good vision and light inside the car and block outside view to protect your privacy. 5、Easy Installation: Easy to install, no drilling required and no damage to your car, convenient for using.

Package List

2 x Side Window Louver

1 x Double Sided Adhesive Tape

Package Dimensions:
Length: 10.00 cm
Width: 7.00 cm
Height: 4.00 cm

Description:

        The item is the blower motor resistor. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment.

Features:

1. Resistance on thermal protection to prevent the vehicle far from overheating greater economic losses.

2. A resistor provides fan speed control.
3. Direct fit. Please check your part number.
4. Great replacement for your old one.
5. Enhance your love car performance.

Specifications:

Material: ABS plastic + Metal

Color: Green + Black

Power: 100W

Current: 100A

Size: 9 x 7cm / 3.54" x 2.76"

OE Part Number: 13248240

Package Weight: 61g

Fitment:

Package Included:

1 x Heater Blower Resistor

Note:

1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding.

2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

3. If the speed control knob of the heater blower does not work, it's most likely that the resistor is damaged.

4. The compatibility above is a guide only, please check the correct part by matching the part number before purchase.

Features

1、Resistance on thermal protection to prevent the vehicle far from overheating greater economic losses 2、A resistor provides fan speed control 3、Direct fit. Please check your part number 4、Great replacement for your old one 5、Enhance your love car performance

Package Dimensions:
Length: 52.00 cm
Width: 16.00 cm
Height: 11.00 cm

Condition: 100% Brand New
Item Type: Body Side Skirts
Material: ABS
Color: Carbon Fiber Style

Length: Approx. 48cm/18.9in

Position: Rear Lip or Side Skirt Extension

Fitment: Universal side skirts, direct replacement

Features

1、Has a certain decorative effect on the car body, if installed properly, it can reduce the reverse airflow generated by the vehicle. 2、Can play a spoiler role, can significantly reduce air resistance under certain conditions. 3、Carbon fiber style, can add a sense of sporty, brings your car a more aggressive racing look. 4、Made of high quality ABS, high strength, not easy to break, durable to use, has long service life. 5、Simple installation and easy to use, actively correcting the route when driving at high speed.

Package List

2 x Side Skirts

6 x Screws

Package Dimensions:
Length: 10.00 cm
Width: 7.00 cm
Height: 4.00 cm

Features

1、Made of environmental protection and flame retardant material, more safe to use. 2、The input voltage is 12-24V, so all 12-24V boats and vehicles can be installed and used. 3、Equipped with 4.2A dual USB port, it can charge for phone, tablet, GPS, etc. 4、Also equipped with voltmeter, which can detect the use status of car battery at any time and prevent safety accidents caused by defective batteries. 5、With good sealing ability, it is waterproof and dustproof.

Package Dimensions:
Length: 28.00 cm
Width: 14.00 cm
Height: 11.00 cm

Item Type: Turbocharger Comp Inlet Elbow Pipe

Material: Aluminum alloy
Diameter: 52 to 80mm / 2 to 3.1in 
OE: 3254849
Application: Replace the damaged and worn bent pipe, guide the air flow of high temperature and high pressure, reduce the resistance of the gas pipe to a certain extent, and improve the efficiency and power output of the engine.

Fitment: For Cummins 5.9L 3.9B ISB 6.7L

Features

1、Applicable Model: Air intake elbow tube is replacement for Cummins 5.9L 3.9B ISB 6.7L, please confirm whether your model is applicable before buying. 2、OE Number: The part number of inlet turbo elbow pipe for reference is 3254849, please confirm whether it is consistent with the OE you need. 3、Reduce Drag: Because of the strong airflow of the turbocharger, the airflow in the curve is the main source of drag. The reasonable design of the inlet conversion curve can reduce the resistance of the pipeline and improve the air flow. 4、Noise Reduction: The optimized design of the intake curve also reduces the noise generated by the air intake tube system and improves the ride comfort of the vehicle. 5、Improved Fuel Economy: By optimizing the air intake tube system to reduce drag, turbocharger intake curves can improve engine efficiency and help owners save money on fuel.

Package List

1 x Turbocharger Comp Inlet Elbow Pipe 

Package Dimensions:
Length: 49.00 cm
Width: 20.00 cm
Height: 6.00 cm

Specification

• The car headrest is designed to give you support for neck and head and maintain your proper posture.
• The flexible design has 4 adjustable positions, and it will be more comfortable to adjust to the right height.
• Filled with soft polyerster, comfortable for you to rest on for a long time and it can self-recover.
• Easy to install, easy to disassemble, adjustable up and down.
• The head pillow cotton coat can be removed or washed.
• Applicable to anyone over the age of 5.

Features

1、The car headrest is designed to give you support for neck and head and maintain your proper posture. 2、The flexible design has 4 adjustable positions, and it will be more comfortable to adjust to the right height.​ 3、Filled with soft polyerster, comfortable for you to rest on for a long time and it can self-recover.​ 4、Meet the ergonomic design, used in the car, office and at home, with four colors optional. 5、The head pillow cotton coat can be removed or washed.

Package Dimensions:
Length: 12.00 cm
Width: 10.00 cm
Height: 8.00 cm

Features

1、This is 799584 carburetor. 2、Top quality carburetor carb replacement with mounting gasket kit. 3、Made of high quality material for higher stablity and reliability. 4、Direct replacement for a proper fit and easy installation. 5、Greatly enhance the ease and convenience.

Package List

1 x 799584 Carburetor
2 x Gaskets

Package Dimensions:
Length: 11.00 cm
Width: 7.00 cm
Height: 5.00 cm

Item Type: Car Antenna Mount

Material: Metal

Color: Black

Fitment:

For  JL JLU  JT 2018-2022

Features

1、Applicable Models: Car antenna mount is fit for JL JLU JT 2018 to 2022. Please confirm whether your model is applicable before buying. 2、Exquisite Look: The car antenna mount holder is painted in black, which is elegant and understated, and make the vehicle more texture. 3、Perfect Fit: The antenna mounting bracket is precisely measured and crafted to ensure a perfect fit to the vehicle without affecting the vehicle's appearance. 4、Excellent Quality: Driver side antenna mount is made of high grade metal material, antioxidant, durable, stable performance, and can withstand all kinds of harsh environments. 5、Easy Installation: The antenna mount holder bracket requires no holes to be drilled and no additional tools for easy installation, saving you valuable time.

Package List

1 x Antenna Mounting Bracket

1 x Bolt

1 x Washer

Package Dimensions:
Length: 10.00 cm
Width: 10.00 cm
Height: 6.00 cm

Item Type: Front Wheel Hub Bearing

Part Number: 517202G000, 5172038110, 517203A000, 517203A101, MB633430
Installation Type: Replace installation
Position on Vehicle: Front, left, right
Fitment:
Replacement for Mitsubishi 3000GT 1991-1999
Replacement for Mitsubishi Diamante 1992-2004
Replacement for Kia Magentis 2002-2010
Replacement for Kia Optima 2002-2013
Replacement for Sonata 2002-2013
Replacement for Kia Sportage 2005-2014
Replacement for Tucson 2005-2014

Features

1、Applicable Model: Front wheel bearing is replacement for Mitsubishi 3000GT Diamante; repalcement for Kia Magentis; Please confirm whether your model matches before buying. 2、OE Number: The part numbers for reference are 517202G000, 5172038110, 517203A000, 517203A101, MB633430, please confirm whether it is consistent with the OE you need. 3、High Load Capacity: Front hub bearing can withstand the impact and pressure generated during the car driving process, to ensure the stability and safety of the vehicle. 4、Alloy Steel: Front wheel hub bearing is made of alloys with durability, wear resistance and rust resistance to ensure their long term and reliable use. 5、Easy to Install: Front wheel hub bearing perfectly matches the original car, easy to install and replace, and can be mounted on the front left or right wheel.

Package List

1 x Front Wheel Bearing

Package Dimensions:
Length: 25.00 cm
Width: 21.00 cm
Height: 4.00 cm

Item Type: Side Window Louver
Material: ABS
Fitment: Replacement for Dodge Charger 2011-2021

Features

1、Ideal Fitment: The delicate side window louver is an excellent replacement for Dodge Charger 2011‑2021 with perfect fitness for better meet your demands. 2、Excellent Ventilation: Keep the air in the car fresh, the side window air vent shade can block dust, leaves, branches, paper and other sundries outside as well. 3、Exquisite Decoration: The side window louver is designed with carbon fiber style look, provide premium and sport decor styles, and protect your car from being scraped and worn. 4、Convenient to Install: The side window air vent cover comes with double sided tape, and has the same shape as original, light weight and compact size making it convenient to install. 5、Premium Materials: The exquisite rear window air vent cover is crafted from of high quality ABS with great toughness and excellent resistant to wear, deformation and impact.

Package List

2 x Side Window Louver

1 x Double Sided Tape

Package Dimensions:
Length: 18.00 cm
Width: 12.00 cm
Height: 5.00 cm

Features

1、Fitment: Front radiator core support is great replacement for BENZ C‑CLASS W205. Manufactured on the basis of original standard. 2、OE Number: A2056203401, 2056203401 are the reference part numbers. Please double check the part number of your item to ensure perfect fit. 3、Stable Fixing: Front radiator core bracket has stable fixing function, can solve the problem of headlight shaking and eliminate the visual impact. 4、Sturdy ABS: Made of selected ABS materials, the support is sturdy, not easy to damage and crack, and can ensure long term stable use. 5、Convenient and Fast Installation: Headlight impact bar bracket fits perfectly with your car, and can be installed without modification and special tools.

Package List

1 x Headlight Impact Bar Bracket

Package Dimensions:
Length: 45.00 cm
Width: 40.00 cm
Height: 18.00 cm

Features

1、Ugrading AC System: Adding air conditioning evaporator to vehicles that do not have it from the factory, provides comfortable interior environment and temperature for your vehicle. 2、3 Wind Speeds: This compressor evaporator has 3 wind speeds, you can adjust air direction and temperature according to your car's needs, convenient to operate. 3、High Performance: Professional manufacturing, 32 pass 4 way coil for maximum airflow and cooling capacity. Support electronic thermostat control, practical modification parts. 4、Universal Fit: Air conditioning evaporator assembly can be used for modification of cars, RVs, camper, agricultural vehicles, engineering vehicles, etc. 5、Professional Installation: Installation is slightly difficult, it is highly recommended to find a professional engineer to assist in the installation to get a better shopping experience.

Package List

1 x AC Evaporator

1 x Condensation Pipe

1 x Tee Pipe

3 x Fixed Bracket

Package Dimensions:
Length: 31.00 cm
Width: 24.00 cm
Height: 7.00 cm

Item Type: Fuel Tank Cap Cover
Material: Carbon Fiber
Finish: Glossy
Pattern: 3K Twill Weave
Process: Dry Carbon
Installation: Self Adhesive
Applicable Models:
Fit for Fairlady Z RZ34 400Z 2022 +

Features

1、Applicable Model: The fuel tank cap cover trim is for Fairlady Z RZ34 400Z 2022 and later. Please confirm whether it is consistent with the product you want before buying to avoid unnecessary return. 2、Premium Material: The fuel tank cap cover trim is made of premium carbon fiber material, lightweight, with clear and beautiful texture, smooth touch. 3、Durable and Waterproof: The fuel tank cap trim sticker is very durable, weatherproof, resistant to high and low temperatures, and not easy to fade, can withstand various harsh road condition. 4、Stylish Look: The exterior fuel tank cap protection trim can enhance the aesthetic of the car exterior and adds a sporty and stylish look to the car. 5、Easy Installation: The door fuel tank cap cover trim features self adhesive design, just peel and stick, no need to modify. Easy to remove and clean without any residue.

Package List

1 x Fuel Tank Cap Cover 

Package Dimensions:
Length: 39.00 cm
Width: 12.00 cm
Height: 12.00 cm

Item Type: Exhaust Muffler
Material: Stainless Steel + Silencer Cotton
Surface Technology: Mirror Polishing
Entrance Diameter: 2in
Export Diameter: 3in
Application: Universal 2.0in exhaust pipe

Features

1、The muffler is densely packed with high‑quality sound‑absorbing cotton to produce a deep tone, resonate to enhance the sound, and use soft porous materials to absorb sound vibration energy. 2、The straight‑through muffler design can reduce back pressure while absorbing sound waves. Made of stainless steel, it is durable. 3、The muffler is used near the end of the vehicle exhaust system, and its working principle is destructive interference and absorption. 4、The muffler wall is made of two layers of stainless steel to help reduce vibration and sound absorption. 5、Professional manufacturing, high precision, strong reliability, making sure safety use.

Package List

1 x Exhaust Muffler

Package Dimensions:
Length: 24.00 cm
Width: 10.00 cm
Height: 6.00 cm

Item Type:  Hood LED Light Mount Brackets

OE: 612590737497
Compatible with most 3 inch LED pod lights/work lights/cube lights

Fitment:

Fit for SVT Raptor 2010-2014( for Raptor 1st Generation) 

Features

1、Applicable Model: Hood LED light mount bracket is replacement for SVT Raptor 2010‑2014, please confirm whether your model is applicable before buying. 2、OE Number: The part number for reference is 612590737497, please confirm whether it is consistent with the OE you need. 3、Antioxidation Steel: Mounting bracket is made of solid steel, cut and CNC forming, sprayed with a layer of anti oxidation black paint on the surface, waterproof, durable, and has a very long lifespan. 4、Function: Left and right side strut mounting hardware is used to mount LED pods on the hinges of the car hood for increased visibility and safety in case of an emergency! 5、Easy to Install: No drilling treatment is required, just install in the factory bolt hole, saving time, and the switch on the hood does not have any effect!

Package List

1 x Pair of Hood Light Mount Brackets (10pcs in total)

Package Dimensions:
Length: 17.00 cm
Width: 12.00 cm
Height: 2.00 cm

Features

1、Made of high quality rubber material, durable in using 2、Can withstand differences in weather conditions 3、The lining is smooth, fluid resistance small, less hydraulic loss 4、Can resist extreme heat, abrasion and corrosion 5、Low-cost and flexible, easy to install

Package Dimensions:
Length: 19.00 cm
Width: 8.00 cm
Height: 3.00 cm

Features

1、Made of quality rubber material, good stability and durability. 2、Original standard, direct replacement for old or broken one. 3、Replacing OE numbers for reference: 2711801819, 2710901629. 4、Easy installation, no need of complicated tools, convenient for using. 5、Built to meet standard specification, strictly follow factory quality control.

Package List

1 x Turbochagrer Intake Hose (With Alloy Buckle)

Package Dimensions:
Length: 12.00 cm
Width: 11.00 cm
Height: 6.00 cm

Item Type: Carb Intake Manifold Pipe Kit

Material: Aluminum alloy, rubber

Intake Manifold Caliber: Approx. 26mm/1.02in, 28mm/1.10in

Fitment:

Fits for 125cc 140cc 150cc 155cc 160cc 200cc 250cc for YX for Lifan for SSR for Thumpstar Pit Dirt Bike Motorcycle

Features

1、Complete Accessory: Package includes one carburetor intake manifold pipe, one adapter boot, one rubber gasket, one paper gasket, one O ring sealing gasket. 2、Important Parameter: The diameter of the intake manifold is 26mm and 28mm, the diameter of the joint is 28mm, and the diameter of the rubber gasket is 25mm. 3、Function: Helps the carburetor to mix a certain proportion of gasoline and air, and uses the kinetic energy of the inhaled air to atomize the gasoline. Enjoy a smooth motorcycle experience. 4、Material: Made of aluminum alloy, rubber material, durable, antioxidant and anti aging, resist cracking caused by drying and prevent soften from high temperature. 5、Fitment: The carb intake manifold pipe kit is a replacement for 125cc 140cc 150cc 155cc 160cc 200cc 250cc for YX for Lifan for SSR for Thumpstar Pit Dirt Bike Motorcycle.

Package List

1 x Carburetor Manifold Intake Pipe

1 x Adapter

1 x Rubber Gasket

1 x Cardboard Gasket

1 x O Ring Gasket

Package Dimensions:
Length: 17.00 cm
Width: 5.00 cm
Height: 3.00 cm

Item Type: 3rd Brake Light
Material: ABS + LED
Manufacturer Part Number: 5128002
Placement on the Vehicle: Rear
Replace Part Number: 7C1613N408AC, 1418383, 1383588, 1519539, 4888990, 5089490, 6C1113N408AB, 6C11-13N408-AB, 6C11-13N408-AC, 6C11-13N408-AD, 6C1113N408AD, 7C16-13N408-AA, 7C1613N408AA, 7C16-13N408-AB, 7C1613N408AB, 3519360, E6DB-13465-BA, E6DB13465BA
Fitment: Replacement for Ford Transit MK7 2006-2014

Features

1、With manufacturer part number of 5128002, replacement for Ford Transit MK7 2006‑2014. 2、High brightness, effectively remind the vehicles driving behind to avoid rear‑end collisions. 3、High luminous efficiency, low power consumption, energy saving, and has stable performance. 4、Simple and fast installation, does not require complicated operations, convenient for using. 5、Designed to have the same form, fit and function as OEM original light, directly replace the old one.

Package List

1 x 3rd Brake Light

Package Dimensions:
Length: 30.00 cm
Width: 13.00 cm
Height: 2.00 cm

Condition: 100% Brand New
Item Type: Motorcycle Fuel Tank Anti‑Slip Pad
Color: Black
Material: Rubber

Size: Approx. 260x105mm/10.23x4.13in

Fitment:

Fit for Honda CB400SF 92-98
Fit for Honda CB400V-TEC 99-12
Fit for Honda CBR6OORR 03-13
Fit for Kawasaki 05-13 ZX636R
Fit for Kawasaki ZX6RR 04-09
Fit for Kawasaki ZX10R 10-13 Z1000
Fit for Yamaha Hornet 01-13 CB600F 1998
Fit for Yamaha Hornet 2004 CB900F 2001
Fit for Yamaha Hornet CB2501996-2010 DN-01 2006-2008

Features

1、It can effectively increase the contact area and prevent sliding. It can also prevent armor jackets, belts, etc. from scratching the gasoline tank. 2、Traction pads are designed to help better control the motorcycle and reduce rider fatigue, so that the rider maintains a stable body posture. 3、Can be installed in frame and fuel tank, very suitable for mechanical cutting, and can perfectly replace old parts. 4、Made of high‑quality rubber materials, which wear‑resistant, fade‑resistant and corrosion‑resistant. 5、Easy to install, small size and lightweight, easy to carry, can be installed within a few minutes.

Package List

2 x Motorcycle Fuel Tank Anti‑Slip Pad

2 x Sticker

Package Dimensions:
Length: 17.00 cm
Width: 10.00 cm
Height: 5.00 cm

Item Type: Radiator cap
Material: ABS+Aluminum alloy
Applicable Models: Universal

Features

1、2 in 1 Design: The water tank cover can prevent the water tank from leaking, and the water temperature gauge can adjust the pressure balance of the water tank. 2、Perfect Replacement: Our water tank cover can observe the temperature of the water tank very well to ensure the safety of the water tank. 3、Universal: Thermostatic radiator cap for motorcycles, off‑road bikes, ATVs, utvs, and more. Ensure driving safety. 4、High Accuracy: High pressure radiator cap with a temperature gauge measure up to 200°C, giving you an accurate reading. 5、Long Durability: Made of ABS + aluminum alloy material, it is durable and can be used for a long time without damage.

Package List

1 x Radiator Cap

Package Dimensions:
Length: 15.00 cm
Width: 10.00 cm
Height: 4.00 cm

Item Type: Motorcycle Front Footrest
Material: CNC T6063 aluminum alloy

Fitment:

Replacement for Aprilia RS660 2021-2022
Replacement for Aprilia Tuono 660 2021-2022
Replacement for Aprilia RSV4 Factory RSV4 R RF RR 2009-2022
Replacement for Aprilia Tuono V4 V4 Factory 2020-2022

Replacement for Aprilia Tuono 1100 Factory 2011-2019

Features

1、Perfect Fitment: Motorcycle front foot pedal is replacement for Aprilia RS660 RSV4 Tuono 660 V4 1100, perfect matching. 2、High Quality Material: Front foot pegs are made of high quality CNC T6063 aluminum alloy, rustproof, oxidize resistant, sturdy and durable. 3、Nonslip Design: Motorcycle foot rests with nonslip texture to increase the friction force, ensure safety riding. 4、Unique Style: Stylish and unique design perfect for decorating your motorcycle, making your motorcycle look eye catching. 5、Easy Installation: Easy to install, direct replacement for the old or damaged front foot pedal, convenient for using.

Package List

1 x pair of Motorcycle Front Footrest

Package Dimensions:
Length: 49.00 cm
Width: 29.00 cm
Height: 1.00 cm

Item Type: Cylinder Head Gasket

OE Number: 12597769, 54563, HS54563, 448931, 134HS H, 26466PT

Fitment:

Replacement for Chevy Cobalt 2.2L 2198CC 134Cu. In. l4 DOHC 2009-2010
Replacement for Chevy HHR 2.0L 1998CC 122Cu. In. l4 DOHC Turbocharged 2010
Replacement for Chevy HHR 2.4L 2384CC 145Cu. In. l4 FLEX DOHC 2011
Replacement for Chevy Malibu 2.4L 2384CC 145Cu. In. l4 ELECTRIC/GAS DOHC2008-2010
Replacement for Chevy Malibu 2.4L 2384CC 145Cu. In. l4 FLEX DOHC 2010-2012
Replacement for Chevy Malibu 2.4L 2384CC 145Cu. In. l4 DOHC 2008-2012
Fits for G5 2.2L 2198CC 134Cu. In. l4 DOHC 2009
Fits for G5 2.4L 2384CC 145Cu. In. l4 DOHC 2007
Fits for G6 2.4L 2384CC 145Cu. In. l4 DOHC 2006-2010
Fits for Solstice 2.4L 2384CC 145Cu. In. l4 DOHC 2006-2009
Replacement for Saturn Ion 2.4L 2384CC 145Cu. In. l4 DOHC 2006-2007
Replacement for Saturn Sky 2.4L 2384CC 145Cu. In. l4 DOHC 2007-2010

Features

1、OE Number: The referencing OE number of this cylinder head gasket are 12597769, 54563, HS54563, 448931, 134HS H, 26466PT. 2、Fitment: The engine cylinder head gasket is a replacement for Chevy Cobalt HHR Malibu, replacement for Saturn Ion Sky 2.4L. 3、Leakage Proof: Effectively prevent water ingress, dust, oil ingress and oil leakage, protect the normal operation of the machine, and effectively improve its service life. 4、Heat Resistant: Good performance, can withstand the test of high speed operation and high temperature roasting, reducing engine wear and damage. 5、Easy to Install: Stringently manufactured to meet the original standard, perfect replacement for the old or broken one, improving the time efficiency.

Package List

1 x Cylinder Head Gasket

Package Dimensions:
Length: 18.00 cm
Width: 14.00 cm
Height: 4.00 cm

Features

1、100% brand new and high quality. 2、Made of high quality material, durable and long service life. 3、It can convert car stereo speaker outputs to RCA outputs 4、Long service life, easy to install and maintain. 5、Suitable for car stereos up to 50 watts

Package Dimensions:
Length: 14.00 cm
Width: 9.00 cm
Height: 6.00 cm

Specification

• Made of high quality alloy materials for durability and stability.
• Stable performance, long time service life, shock-proof, wear-resistant.
• Perfect replacement for your old or broken idle control valve.
• Professional manufacturing, product quality is worthy of your trust.
• Fit for Acura Integra (89-88) Honda Civic (95-88)Honda CRX (91-88).

Features

1、Made of high quality alloy materials for durability and stability. 2、Stable performance, long time service life, shock-proof, wear-resistant. 3、Perfect replacement for your old or broken idle control valve. 4、Professional manufacturing, product quality is worthy of your trust. 5、Fit for Acura Integra (89-88) Honda Civic (95-88)Honda CRX (91-88).

Package Dimensions:
Length: 17.00 cm
Width: 15.00 cm
Height: 2.00 cm

Specification

• Made with high strength metal and high quality plastic for maximum durability.
• The tyre repair tool, well adapted for fixing tyre easily.
• Easy to carry and operate make it a good partner when you need it.
• This kit will let you repair the puncture quickly and effectively.
• The blue plastic box is easily to transport and store the tool.

Features

1、Made with high strength metal and high quality plastic for maximum durability 2、The tyre repair tool, well adapted for fixing tyre easily 3、Easy to carry and operate make it a good partner when you need it 4、This kit will let you repair the puncture quickly and effectively 5、The blue plastic box is easily to transport and store the tool

Package Dimensions:
Length: 31.00 cm
Width: 8.00 cm
Height: 5.00 cm

Item Type: Car Glove Box Interval
Material: ABS
Purpose: Storage
Fitment:
Replacement for Tesla Model3/Y 17-21

Features

1、Built to original car specifications and standard, replacement for Tesla Model3/Y 17‑21. 2、Environmental protection engineering ABS plastic material, non‑toxic no peculiar smell, wear‑resistant and scratch‑proof. 3、Detachable, simple installation, easy to use, car original data open mold, more fitting version. 4、Elaborate manufacturing technology, has high precision and stable performance. 5、High quality and durable overriding clutch, can be used for a long time, good reliability.

Package List

4 x Car Glove Box Interval

Package Dimensions:
Length: 17.00 cm
Width: 11.00 cm
Height: 3.00 cm

Item Type: Motorcycle Mobile Phone Holder

Material: Aluminium alloy

Color: Black

Fitment:

Fits for NINJA 1000 2011 to 2019

Features

1、Applicable Model: The motorcycle mobile phone holder is a replacement for NINJA 1000 2011 to 2019, please check the model and year before ordering. 2、Function: The phone holder is mounted above the dashboard of the motorcycle, which will provide you with better driving experience, and will not block your vision. 3、Practical in Use: Convenient for you to answer calls, play music or GPS positioning operations while riding, without hindering your riding. 4、High Strength Material: The navigation bracket is made of high strength aluminium alloy material, which has high strength and not easy to bend. 5、Easy to Install: It can be installed in the motorcycle and used as a bracket for navigation and smartphones. Easy to use, quick to install, it doesn't take much time.

Package List

1 x Motorcycle Mobile Phone Holder (9 Pcs)

Package Dimensions:
Length: 13.00 cm
Width: 8.00 cm
Height: 6.00 cm

Item Type: HD Reverse Camera

Material: Plastic

Working Voltage: 12V

Features

1、HD Image: The 3063 chip of the rear view camera brings better clarity, real time reflection of the rear of the vehicle, effectively avoiding blind spot problems. 2、Driving Safety: The backup camera can provide accurate and reliable rear images when reversing automatically to prevent collisions and potential hazards. 3、Unique Look: The backup reverse camera has small straw hat design, lightweight and space saving, not hindering vision, suitable for various models. 4、Easy to Install: The rear back view camera has a simple installation, convenient and time saving, easy to use, reducing the astern operation time, optimizing the driving experience. 5、Durable Material: The backup reverse camera is made of premium plastic material, durable and reliable material, high strength and wear resistant, not easy to break, having long service time.

Package List

1 x Camera

1 x Plug Connection cable

1 x Black Red Connection Cable

1 x Opening Bit

1 x Instruction

Package Dimensions:
Length: 36.00 cm
Width: 30.00 cm
Height: 10.00 cm

Features

1、OEM Number: The replacement OEM number of the dash clock panel is 95B 858 189 C 5Q0 for reference to assist you find exactly what you need. 2、Ideal Fitment: The upper center dash cover is a wonderful replacement for Macan 2014‑2020 with perfect fit to accurately meet your demands. 3、Fine Appearance: The delicate dashboard stopwatch cover is a delicate decoration with black look, making your car interior more distinctive. 4、Quality Materials: The upper center console dash cover is crafted from premium ABS plastic with high strength and excellent resistance to wear. 5、Convenient to Install: No need to program at all, no damage to your car, only follow the correct operating steps to mount, easy and convenient.

Package List