Package Dimensions:
Length: 28.00 cm
Width: 26.00 cm
Height: 7.00 cm

Item Type: Motorcycle Windshield
Material: PMMA and Iron
Fitment:
Replacement for CB650R 2019 2020 2021

Features

1、Good Fitment: The motorcycle windshield is repalcement for CB650R 2019 2020 2021. 2、Durable materials: The windshield is made of high‑quality PMMA and iron, which is strong, durable, has a long service life and is easy to clean. 3、Protective: It can protect the driver from flying debris and act as a fairing to deflect wind, rain, and mud on trails. 4、Stable performance: It can keep the driver warm in cold weather and can also reduce the fatigue of your hands, arms and chest. 5、Decorative: The motorcycle windshield can add a feeling of luxury and elegance to your motorcycle. 6、Flexible: Its hardware height and angle can be fully adjustable, which is convenient for you to adjust as you need, and it is very easy to install.

Package List

1 x Motorcycle Windshield

2 x Bracket

2 x Yellow Gasket

4 x Screw

4 x Nut

8 x Transparent Gasket

Package Dimensions:
Length: 127.00 cm
Width: 28.00 cm
Height: 8.00 cm

Item Type: Rear Trunk Spoiler
Material: ABS
Color: Carbon Fiber Style
Finish: High Gloss UV Protected Clear Coat
Type: for M4 Style High Kick Performance Spoiler
Fitment:
Fit for 3 Series E90 Sedan 2006-2011 (NOT For E91, E92, E93)
Fit for M3 E90 Sedan 2007-2013

Fitting Instructions:
1. Make sure that the mounting surface is cleaned thoroughly afterward.
2. Test fit the spoiler prior to installing.
3. Line up the spoiler on the trunk and marks its proper positioning with painter's tape.
4. Peel the red backing of the tape approximately 2 inches from either side of the spoiler.
5. Place the spoiler on the car without removing all of the red backing of the tape.
6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
7. Apply pressure to the spoiler after it is installed with painter's tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.

Features

1、Perfectly fit for 3 Series E90 & M3 2006‑2011, it is refitted for M4 Style high kick spoiler. 2、Using the flow of air across the body to apply downward force to improve rear tires traction and improve stable control at high speeds. 3、Offering better aerodynamics, reduces drag, increases fuel efficiency, reinforces downforce, traction and stability. 4、Constructed from premium ABS plastic material, corrosion resistant, high strength, long durability. 5、Supplied with 2pcs double-sided tape, simple installation, no need of complicated tools.

Package List

1 x Rear Trunk Spoiler

2 x Double-Sided Tape

Package Dimensions:
Length: 18.00 cm
Width: 10.00 cm
Height: 6.00 cm

Features

1、Made of plastic, high grade cushioning and smooth edges. 2、This box with sponge cushion will protect your glasses from nicks, chips and scrape. 3、Practical and beautiful, dustproof, heat‑resistant and shock‑proof. Portable and simple design, small size. 4、Easy to install, fits easily over sun visor or anywhere. 5、Decorate the car's exterior to make your car special and unique.

Package List

1 x Sunglasses case 2 x Buckles

Package Dimensions:
Length: 49.00 cm
Width: 13.00 cm
Height: 2.00 cm

Item Type: Intake Manifold Gasket
Material: Iron
OE: LR011585, LR011586
Fitment:
Replacement for LAND ROVER Range Rover V8 Supercharged 2010 - 2019
Replacement for LAND ROVER Range Rover Sport V8 Supercharged 2010 - 2019

Features

1、OE Number: Engine intake manifold gasket set replacement part number is LR011585, LR011586 for reference, please double check the part number of your item before purchasing. 2、Ideal Fitment: Replacement for LAND ROVER Range Rover V8 Supercharged 2010 ‑ 2019 and replacement for LAND ROVER Range Rover Sport V8 Supercharged 2010 ‑ 2019. 3、Excellent Sealing Performance: Engine inlet manifold gasket adopts special sealing innovations and technologies, providing superior sealing performance for better car repairing. 4、Durable Construction: Heavy duty engine intake manifold spacer is exquisitely made from superior iron materials with black surface, not easy to deform, rust or damage, stable and durable. 5、Great Replacement: Superior intake manifold gasket is precisely engineered and manufactured for the repairing environment to help seal imperfect sealing surfaces.

Package List

2 x Intake Manifold Gasket

Package Dimensions:
Length: 18.00 cm
Width: 10.00 cm
Height: 8.00 cm

Item Type: ATV Carburetor
Material: Aluminum Alloy + ABS + Cardboard + Rubber
Air Filter: Approx. 35mm/1.38in
Carburetor Inlet Diameter: Approx. 19mm/0.75in
Fitment:
Fit for Chinese brands 4 stroke ATVs, Go kart, UTV under 49cc
Replacement for TaoTao
Replacement for Buyang
Replacement for Coolsport
Replacement for Lifan
Replacement for Kazuma
Replacement for SUNL
Replacement for Redcat
Replacement for Eagle
Fit for most Chinese brand 49CC 50CC 70CC 90CC 100CC 125CC ATV QUAD DIRT BIKE, also Fits 49CC-125CC SSR SDG Pro Dirt Bike

Features

1、Fit Chinese Brand: Carburetor is good replacement for TaoTao, replacement for Coolsport, replacement for Kazuma, replacement for SUNL, etc. 2、Wide Application: Carburetor can be widely used in 49CC 50CC 70CC 90CC 100CC 125CC ATV, UTV, dirt bike, and go kart. 3、Carb Function: Carburetor is good at mixing fuel and air, keeping the engine running smoothly and preventing the engine from running out of oil or overflowing. 4、Advantage: Reliable and durable, this carb kit gives your ATV new power to help achieve optimum engine performance. 5、High Reliability: The carburetor is produced in strict accordance with the highest production standards, with high reliability and stable performance.

Package List

1 x ATV Carburetor

1 x Air Filter

1 x Fixing Clip

1 x Fuel Filter

2 x Gasket

1 x Sealing Ring

Package Dimensions:
Length: 29.00 cm
Width: 26.00 cm
Height: 17.00 cm

Item Type: Motorcycle Tank Bag
Material: PU Tank Bag+Iron Bracket+Nylon Adapter
Craft: Hot Suction Molding
Size: Approx. 29cmx26cmx14cm / 11.42inx10.24inx5.51in
Capacity: 3L
Load: Approx. 2kg/4.41lb
Function: Increase storage space
Installation Position: On the tank cover
Fitment:

Fits for MT-09 2014-2023
Fits for MT-09 TRACER 2015-2020
Fits for TRACER900 GT 2019-2023
Fits for FZ-09 2014-2020
Fits for FJ-09 2015-2020

Features

1、Applicable Model: The motorcycle oil tank bag is a replacement for MT‑09 2014‑2023, for MT‑09 TRACER 2015‑2020, for TRACER900 GT 2019‑2023, for FZ‑09 2014‑2020, for FJ‑09 2015‑2020. 2、Versatile and Convenient: This large motorcycle oil tank bag offers multifunctional use with its quick release and easy lock mechanism, can also convert into a messenger bag or handbag. 3、Transparent Top: With a transparent window on the top, ideal for accessing mobile phones and navigation systems conveniently, waterproof zippers, rain cover offer extra protection for your belongings. 4、Solid Construction: This tank bag utilizes thermoforming technology, resulting in a semi rigid structure, offers added solidity, a light weight, strong bearing capacity. 5、Spacious Capacity: With a 3L capacity, this bag is perfect for carrying a variety of items, meets the needs of most motorcycle riders, catering to long distance travels.

Package List

1 x Tank Bag
3 x Screw
3 x Bolt
1 x Bracket
1 x Adapter
1 x Strap
1 x Waterproof Cover

Package Dimensions:
Length: 60.00 cm
Width: 55.00 cm
Height: 6.00 cm

Features:
Premium Material: The car seat cushion is made of premium sandwich fabric, resistant to sun exposure and does not heat up. Its 3D hollow design ensures strong breathability, preventing discomfort and sweat from prolonged sitting. Additionally, it boasts quick-drying, moisture-wicking attributes and is resistant to bacteria and mites.
Intelligent Gravity Sensing: Equipped with smart gravity sensing technology, the seat cushion automatically starts blowing air when you sit down and shuts off when you get up. This intelligent cushion provides convenience and energy efficiency.
Powerful and Quiet Fans: The seat cushion for cars features one hidden front independent large fan (12W, 3000 RPM) and seven back fans (17W, 5000 RPM). These high-speed, quiet fans ensure larger and more even air distribution for optimal comfort.
Auto Power-off Function: The included cigarette lighter comes with an automatic power-off function to prevent battery drain if you forget to turn off the switch, ensuring safety and energy conservation.
Wide Compatibility: The cooling car seat cover is suitable for all 12V/24V vehicle models and can be used in any car with a cigarette lighter socket. This universal compatibility makes it a convenient accessory for any vehicle, including trucks and cars.

Specifications:
Item Name: Cooling Seat Cover
Main Material: Sandwich Fabric
Power: 24W
Voltage: DC12V/24V
Power Connection: cigarette lighter
Suitable For: truck, car
Color: Black and Red
Size: 63*48*50cm/24.8*18.9*19.69inch

Package Information: 
Package Size: 60*55*6cm/23.62*21.65*2.36inch
Package Weight: 1500g/3.31lb

Package List:
1 * Seat Cushion
1 * Cigarette Lighter

Features

1、Premium Material: The car seat cushion is made of premium sandwich fabric, resistant to sun exposure and does not heat up. Its 3D hollow design ensures strong breathability, preventing discomfort and sweat from prolonged sitting. Additionally, it boasts quick-drying, moisture-wicking attributes and is resistant to bacteria and mites. 2、Intelligent Gravity Sensing: Equipped with smart gravity sensing technology, the seat cushion automatically starts blowing air when you sit down and shuts off when you get up. This intelligent cushion provides convenience and energy efficiency. 3、Powerful and Quiet Fans: The seat cushion for cars features one hidden front independent large fan (12W, 3000 RPM) and seven back fans (17W, 5000 RPM). These high-speed, quiet fans ensure larger and more even air distribution for optimal comfort.

Package List

1 * Seat Cushion
1 * Cigarette Lighter

Package Dimensions:
Length: 76.00 cm
Width: 21.00 cm
Height: 11.00 cm

Item Type: Low Profile Car Ramps

Material: HDPE plastic

Functions: Used for vehicle chassis maintenance, engine maintenance, tire maintenance and so on
Applicable model:
For 4400 lbs vehicle weight common

Features

1、Provide Car Maintenance: 2 ramps to secure your vehicle to storage or working areas, hollow design of the block to prevent moisture accumulation, can be used to repair the vehicle at any time, regardless of the weather. 2、Load Bearing Capacity: The car low ramp has a load capacity of 4,400 LBS. 2 car ramps will stabilize your car. Find a safe flat surface to balance your car. 3、Lightweight and Easy to Carry: The plastic ramps are lighter than the wooden concrete ramps. Each automatic ramp weighs 3.4 pounds and can be stored in the trunk in case of emergency. 4、Heavy Duty Plastics: Slopes are made of lightweight but high strength plastics. These low profile ramps are designed for durability. It is safe and strong and can be used for a long time. 5、Ramp Size: Each low profile ramp measures 27.6 x 7.9 x 3 inches. The ramp maximum lift height is 2.5 inches, providing enough space for car maintenance.

Package List

2 x Car Ramps

Package Dimensions:
Length: 12.00 cm
Width: 5.00 cm
Height: 3.00 cm

Item Type: Front Shock Absorber Oil Seal
Material: Rubber
Quantity: 2 x Oil Seal; 2 x Dust Cover
Fitment:
For F650CS 2001-2005
For F650CS ABS 2003-2005
For R1200GS 2004-2012
For R1200ST 2005-2007
For F650GS 2006-2012
For R1200GS Adventure 2006-2012
For F700GS 2013

Features

1、Made on the basis of the original specification, match for F650CS ABS 2003-2005. 2、Fork shock absorber oil seal, perfect match with the original motorcycle, please rest assured to use. 3、Made of high quality rubber material, dustproof, waterproof and corrosion proof, long service life. 4、A good replacement on the market for your motorcycle old or broken front shock absorber oil seal. 5、Easy to install, no complicated installation steps, excellent quality, convenient operation.

Package List

2 x Oil Seal

2 x Dust Seal  

Package Dimensions:
Length: 12.00 cm
Width: 8.00 cm
Height: 2.00 cm

Item Type: Glove Box Lid Hinge Kit
Material: Metal
Fitment:
(This bracket is NOT compatible with any convertible models)
Fit for A4 B6 2002 - 2005, B7 2006 - 2008
Fit for RS4 B7 2006 - 2008
Fit for S4 B6 2003–Dec 2004, S4 B7 2004–Jun 2008
Fit for Seat Exeo/ST 3R5 (2009-2014)

Associated Part Numbers:
8E2857131, 8E2857035, 8E0880802, 8E2880324.

Features

1、The bracket is made to fit the contour of the glove box hinge to provide a firm fit. 2、The part of bracket that fits the glove box cover is also bent to fit the contour of the cover of other shapes. 3、The bracket also has countersunk holes so that the fixing screws are placed flush on the bracket. 4、Each bracket is fixed at 4 points to provide additional safety, which is an excellent solution to common failures. 5、The kit also includes 2 hinge pins, which replace the main pins that can sometimes be damaged.

Package List

2 x Hinge 

2 x Pins

8 x Screws

Package Dimensions:
Length: 5.00 cm
Width: 3.00 cm
Height: 2.00 cm

Specification

• This is a fuel line adapter kit to suit fuel rail, and it will match your equipment perfectly.
• Replace the stock fuel pressure regulator with this adapter kit to allow fitment of an aftermarket remote unit.
• Fits (inlet) adapter for Mitsubishi Evo 1 2 3ECLIPSE DSM fuel rail.
• Comes with 1 adapters and 2 fittings. It is convenient and practical.
• It is made from premium aluminium for strong strength and long durability.

Features

1、This is a fuel line adapter kit to suit fuel rail, and it will match your equipment perfectly 2、Replace the stock fuel pressure regulator with this adapter kit to allow fitment of an aftermarket remote unit 3、Fits (inlet) adapter for Mitsubishi Evo 1 2 3ECLIPSE DSM fuel rail 4、Comes with 1 adapters and 2 fittings. It is convenient and practical 5、It is made from premium aluminium for strong strength and long durability

Package Dimensions:
Length: 5.00 cm
Width: 4.00 cm
Height: 4.00 cm

Item Type: Fuel Injection Pressure Regulator
Material: Iron + aluminum
OEM: 23280-21010
Fitment:

2016 Replacement for Scion iM Base 1.8L L4 - Gas.
2015 Replacement for Scion iQ Base 1.3L L4 - Gas.
2015 Replacement for Scion xB Base 2.4L L4 - Gas.
2015-2016 Replacement for Scion tC Base 2.5L L4 - Gas.
2016 Replacement for Camry XLE 2.5L L4 - Gas.
2016 Replacement for Camry Hybrid XLE 2.5L L4 - Electric/Gas.
2016 Replacement for Camry SE 2.5L L4 - Gas.
2016 Replacement for Camry XSE 2.5L L4 - Gas.
2016 Replacement for Camry Hybrid LE 2.5L L4 - Electric/Gas.
2016 Replacement for Camry Special Edition 2.5L L4 - Gas.
2016 Replacement for Camry Hybrid SE 2.5L L4 - Electric/Gas.
2016 Replacement for Camry LE 2.5L L4 - Gas.
2015 Replacement for Camry Hybrid LE 2.5L L4 - Electric/Gas.
2015 Replacement for Camry Hybrid XLE 2.5L L4 - Electric/Gas.
2015 Replacement for Camry LE 2.5L L4 - Gas.
2015 Replacement for Camry XSE 2.5L L4 - Gas.
2015 Replacement for Camry SE 2.5L L4 - Gas.
2015 Replacement for Camry Hybrid SE 2.5L L4 - Electric/Gas.
2015 Replacement for Camry XLE 2.5L L4 - Gas.
2015 Replacement for Highlander LE 2.7L L4 - Gas.
2015 Replacement for Avalon Hybrid Limited 2.5L L4 - Electric/Gas.
2016 Replacement for Prius Four Touring 1.8L L4 - Electric/Gas.
2016 Replacement for Prius Three Touring 1.8L L4 - Electric/Gas.
2016 Replacement for Prius Two Eco 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius Two 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius Four 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius Three 1.8L L4 - Electric/Gas.
2015 Replacement for Prius Five 1.8L L4 - Electric/Gas.
2015 Replacement for Prius C Two 1.5L L4 - Electric/Gas.
2015 Replacement for Prius C Four 1.5L L4 - Electric/Gas.
2015 Replacement for Prius C Three 1.5L L4 - Electric/Gas.
2015 Replacement for Prius C One 1.5L L4 - Electric/Gas.
2015 Replacement for Prius Plug-In Base 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius V Five 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius V Two 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius V Four 1.8L L4 - Electric/Gas.
2015-2016 Replacement for Prius V Three 1.8L L4 - Electric/Gas.
2015-2016 Replacement for RAV4 XLE 2.5L L4 - Gas.
2015-2016 Replacement for RAV4 LE 2.5L L4 - Gas.
2015-2016 Replacement for RAV4 Limited 2.5L L4 - Gas.
2015 Replacement for Venza LE 2.7L L4 - Gas.
2015 Replacement for Venza Limited 3.5L V6 - Gas.
2015 Replacement for Venza XLE 2.7L L4 - Gas.
2015 Replacement for Venza XLE 3.5L V6 - Gas.
2015-2016 Replacement for Yaris SE 1.5L L4 - Gas.
2015-2016 Replacement for Yaris LE 1.5L L4 - Gas.
2015-2016 Replacement for Yaris L 1.5L L4 - Gas.
2011-2016 Replacement for CT200h Base 1.8L L4 - Electric/Gas.
2014-2016 Replacement for CT200h F Sport 1.8L L4 - Electric/Gas.
2013-2015 Replacement for ES300h Base 2.5L L4 - Electric/Gas.
2006-2007 Replacement for GS430 Base 4.3L V8 - Gas.
2010-2012 Replacement for HS250h Premium 2.4L L4 - Electric/Gas.
2010-2012 Replacement for HS250h Base 2.4L L4 - Electric/Gas.
2015-2016 Replacement for NX300h Base 2.5L L4 - Electric/Gas.
2007-2009 Replacement for RX350 Base 3.5L V6 - Gas.

Features

1、Part Number: According to the original factory specifications, fuel injection pressure regulator reference OEM number is 23280‑21010. 2、Applicable Model: Replacement for Scion Camry Prius RAV4 Venza Yaris; Replacement for CT200h ES300h GS430 HS250h NX300h RX350 etc. 3、Function: The fuel pressure regulator is a component that ensures the normal fuel pressure in the automobile oil circuit. The fuel injection amount is precisely controlled by controlling the fuel injection timing. 4、Good Replacement: When the fuel pressure regulator is not working properly, it should be replaced. When disassembling, the pressure of the fuel system should be relieved first. 5、Durable Material: Made of high quality iron+aluminum material, reliable performance and durable, very good replacement and repair of the original damaged pressure regulator.

Package List

1 x Fuel Injection Pressure Regulator

Package Dimensions:
Length: 8.00 cm
Width: 4.00 cm
Height: 2.00 cm

Specification

• This is a brand new 2 button remote key case with uncut blank blade.
• Manufactured form ABS plastic material with CNC carving, it is durable and beautiful.
• A perfect replacement for a key with broken buttons or worn key case.
• Protect your smart key from everyday wear and tear, and keep it stay as bright as new.
• Compact size, small and convenient, easy to carry and store.

Features

1、This is a brand new 2 button remote key case with uncut blank blade. 2、Manufactured form ABS plastic material with CNC carving, it is durable and beautiful. 3、A perfect replacement for a key with broken buttons or worn key case. 4、Protect your smart key from everyday wear and tear, and keep it stay as bright as new. 5、Compact size, small and convenient, easy to carry and store.

Package Dimensions:
Length: 14.00 cm
Width: 11.00 cm
Height: 3.00 cm

Item Type: Headrest Collar
Material: Aluminium Alloy
Height: Approx. 22.7mm/0.9in
Fitment: For Car, SUV, Truck

Features

1、There is no need to modify the interior shape of the vehicle, and you can also make your car have a luxurious appearance. 2、Headrest collar is very suitable for enhancing car decoration and atmosphere. 3、Headrest Ring has personalized color and appearance can meet your DIY needs. 4、A seat headrest decoration with collar ring decoration, simple and beautiful. 5、Made of aluminium alloy. Universal and easy to and install, suitable for Car, SUV, Truck.

Package List

4 x Headrest Decoration

Package Dimensions:
Length: 12.00 cm
Width: 11.00 cm
Height: 8.00 cm

Item Type: UTV Whip Mount

Material: Aluminum

Product Color: Black
Applicable Specifications: 1.75in-2in anti roll bar

Mounting Bracket Aperture Size: Approx: 12mm/0.47in

Application: 

Fit for Can‑am Maverick X3

Fit for RZR 900 1000 XP Pro Turbo

Fit for Talon 1000

Fit for Mule or other SxS with 1.75 Inch - 2 Inch roll cages

Features

1、Compatibility: UTV whip mount is fit for Can‑am Maverick X3, fit for RZR 900 1000 XP Pro Turbo, fit for Talon 1000, fit for Mule, fit for SxS with 1.75in ‑ 2in anti roll bars. 2、Adjustable Design: Mounting bracket adopts ten pin design to go around the base, allowing you to have multiple directions to freely adjust the mounting bracket. 3、Application: The mounting bracket aperture size is 12mm/0.47in, which is perfect for fixing flag lights, whip lights, antenna lights. 4、Rust Proof: High strength aluminum ensures that your whip light will not fall or bend, rust proof, also can be applied on various terrains and all weather. 5、Easy Install: The brackets are easy to install, requires no modifications and no drilling, which is a great replacement that will fit your UTV or ATV perfectly.

Package List

2 x UTV Whip Mount

2 x Adhesive Tape

2 x Hex Wrench

1 x Screw

1 x Gasket

Package Dimensions:
Length: 13.00 cm
Width: 10.00 cm
Height: 9.00 cm

Item Type: Fuel Pump Assy
Material: Metal alloy

Replace OEM: 826398A3, 826398T3, 826398A1, 62Y 24410 00 00, 62Y 24410 02 00, 62Y 24410 01 00, 62Y 24410 03 00, 62Y 24410 04 00

Application: Ideal substitute, manufactured according to the original standard, matching the appearance and function of the original, meet OEM standards, directly replace and refurbish the original old fuel pump, improve fuel efficiency
Fitment:

for F50TLHV F50TLRV T50TLRV FUEL 1997
for F25ELHW F25ELRW F25ESHW F25TLRW F50TLHW F50TLRW T50TLRW FUEL 1998
for F25ELHX F25ELRX F25ESHX F25MLHX F25MSHX F25TLRX F40TLRX F50TLRX T50TLRX FUEL 1999
for F25ELHY F25ELRY F25ESHY F25MLHY F25MSHY F25TLRY F40ESRY F40MLHY F40MSHY F40TLRY FUEL 2000
for F50TLRY T50TLRY FUEL 1 2000
for F25ELHZ F25ELRZ F25ESHZ F25ESRZ F25MLHZ F25MSHZ F25TLRZ FUEL 2001
for F30TLRZ F40ESRZ F40MLHZ F40MSHZ F40TLRZ T25TLRZ FUEL 1 2001
for F50TLRZ T50TLRZ FUEL 2001
for F25ELHA F25ELRA F25ESHA F25ESRA F25MLHA F25MSHA F25TLRA F30TLRA F40ESRA F40MJHA F40MLHA F40MSHA F40TLRA F50TJRA F50TLRA F60TLRA T25TLRA T50TLRA FUEL 1 2002
for F25ELHB F25ELRB F25ESHB F25ESRB F25MLHB F25MSHB F25TLRB T25TLRB FUEL 1 2003

Also fits for F25-F60 HP 1995-2004 models

Features

1、Fitment: Fuel pump assy is replacement for F50TLHV F50TLRV T50TLRV F25ELHW F25ELRW F25ESHW F25TLRW F50TLHW F50TLRW, etc. 2、Replace OEM Part Number: The OEM number is 826398A3, 826398T3, 826398A1, 62Y 24410 00 00, 62Y 24410 02 00, 62Y 24410 01 00, 62Y 24410 03 00, 62Y 24410 04 00. 3、High Quality Material: Fuel pump is made of high quality metal alloy material, rustproof, high strength, sturdy and durable, has a long service time. 4、Excellent Performance: Professional manufacturing, exquisite workmanship, high accuracy, high efficiency, stable performance and high reliability. 5、Simple Installation: The installation is simple, direct replacement for the old or broken one, convenient for using, save your time and energy.

Package List

1 x Fuel Pump Assy

Package Dimensions:
Length: 25.00 cm
Width: 15.00 cm
Height: 10.00 cm

Item Type: Interior Rear View Mirror
Material: Plastic
OE: 76400-SDA-A03 76400SDAA03
Installation Location: Inside The Cab
Installation Method: Direct Installation
Fitment:
Replacement for Accord 2dr 2003-2012
Replacement for Accord 4dr 2003-2007
Replacement for Accord 4dr (except models with leather) 2008-2012
Replacement for Civic 2dr 4dr 2006-2011
Replacement for Civic Hybrid 2006-2015
Replacement for CR-Z 2011-2016
Replacement for Insight 2010-2014 

Features

1、Fitment: Replacement for Accord 2dr 2003‑2012, replacement for Civic 2dr 4dr 2006‑2011, replacement for CR‑Z 2011‑2016, replacement for Insight 2010‑2014. 2、Part Number: Replace the OEM number for reference, 76400‑SDA‑A01, 76400‑SDA‑A03, no need to worry about adaptation problem. 3、Clear Vision: The rearview mirror has a wide field of view, which effectively eliminates blind spots and makes driving safer. 4、Premium Plastic: The car interior rearview mirror is made of high quality plastic material, which is strong, reliable and durable, not easy to break. 5、Easy Operation: Simple installation, no complicated operations, convenient and easy for you to use.

Package List

1 x Interior Rear View Mirror 

Package Dimensions:
Length: 31.00 cm
Width: 17.00 cm
Height: 14.00 cm

Features:
Replacement for BMW R1200GS ADV F800GS Adventure S1000XR 2013 2014 2015 2016 2017 2018.
A perfect Hand Protector for your motorcycle, and ensures your safe in riding.
Made of great quality ABS plastic materials, which is and sturdy.
Easy installation without any modifications, and there are one pair in package.
Please confirm this product is fit for your motorcycle before purchase.

Specifications:
Material: ABS Plastic
Color: Transparent, Gray, Brown (optional)
Quantity: 2pcs/pair
Installation Position: Both side of handlebar
Package Size: 30.5*17*14cm / 12*6.69*5.51in.
Package Weight: 410g / 14.46oz

Package List:
2 * Hand Protector

Features

1、For BMW R1200GS ADV F800GS Adventure S1000XR 2013 2014 2015 2016 2017 2018. 2、A perfect Hand Protector for your motorcycle, and ensures your safe in riding. 3、Made of great quality ABS plastic materials, which is and sturdy.

Package List

2 * Hand Protector

Package Dimensions:
Length: 23.00 cm
Width: 10.00 cm
Height: 5.00 cm

Features

1、The storage box is more convenient than the traditional sun visor glasses case to use. 2、You can use the sun visor without the need to take off the glasses case, more comfortable to use. 3、The holder will not block the line of sight, moreover help make the interior more neat. 4、The holder can perfectly replace for the original the driver side or passenger overhead grab handle. 5、The damping spring has a good tension to close the case slowly and effectively protect the glasses.

Package List

1 x Glasses Case

2 x Screw

2 x Bolt

2 x Card

2 x Base

2 x Buckle

Package Dimensions:
Length: 12.00 cm
Width: 10.00 cm
Height: 3.00 cm

Item Type: Front Foot Peg

Material: T6063 aluminum alloy

Technology: CNC machined

Fitment:

Replacement for Benelli Tornado 252R 2021-2022
Replacement for Benelli Tornado 302R 2018-2022
Replacement for Benelli BN302S 2018-2022
Replacement for Benelli TNT 600I 2018-2022
Replacement for Benelli TNT 899 2022
Replacement for Benelli TNT 135 2022

Features

1、Fitment: The front foot peg is a replacement for Benelli Tornado 252R 2021‑2022, for Tornado 302R 2018‑2022, for BN302S 2018‑2022, for TNT 600I 2018‑2022. 2、Unique Design: The tubular design provides maximum strength without adding weight, which is a perfect replacement for your broken foot peg pedals. 3、Material: Made of high strength T6063 aluminum material, with CNC machined, resist to rusting and fading, wear proof, deformation proof and durable. 4、Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability. 5、Easy Installation: It will perfectly match to your vehicle, do not require any modifications. You just need to take off your old motorcycle foot pegs, then install new replacement.

Package List

1 x Pair of Front Foot Peg

Package Dimensions:
Length: 15.00 cm
Width: 13.00 cm
Height: 6.00 cm

Features

1、Portable car water washer, perfect for car washing, home cleaning, plant watering, pet shower and more. 2、It supports 8 splash modes and can be easily switched by rotating the adjustmentring to meet your different needs. 3、TPR rubber-coated handle, ergonomically designed. With labor-saving buckle, reducing hand fatigue for long-term use. 4、Powerful water pressure and strong impact can easy to remove dust and mud. The water flows can be adjusted. 5、Delivery includes water hose and faucets connectors, which are highly compatible and convenient to use.

Package Dimensions:
Length: 23.00 cm
Width: 12.00 cm
Height: 11.00 cm

Features

1、Fits for Mitsubishi Pajero Montero Shogun V31 V32 V33 V43. 2、Using high-quality ABS plastic, durable, high and low temperature resistant. 3、Install on your car's dashboard perfectly so that it doesn't block the buttons on your car. 4、This replacement air exhaust vents look great and works perfectly with your car. 5、Easy installation and perfect fitment, no modification needed.

Package List

2 x Dash Air Outlet Vent

Package Dimensions:
Length: 40.00 cm
Width: 29.00 cm
Height: 9.00 cm

Features:
1. Made of high quality chrome-vanadium steel, and it is ideal for everyday needs in the workshop. One set for all applications.
2. With Super Lock/ wave shape.
3. Due to the new wave shape, the tightening pressure is completely transferred to the surfaces of the screw head or nut.
4. The power transmission is about 15% higher.
5. No over-turning of the head or nuts possible, easy loosening of damaged nuts or screw hexagonal.
6. Hardness and torsion according to DIN.
7. All parts have their place in a clearly arranged special tool case. No part is lost anymore or lies around somewhere. So you keep the overview at work.

Specification:
Condition: 100% Brand New
Item Type: Socket Wrench Set
Material: Steel
Color: As picture shown 
Size:  
1/4in (6.3mm)
Attachments (nut) in Sizes: 4 / 4.5 / 5 / 5.5 / 6/7/8/9/10/11/12/13 and 14 Mm
Attachments Long in the Sizes: 6/7/8/9/10/11/12/13mm
Star Socket Attachments: E4 / E5 / E6 / E7 / E8
Star Socket Bit Inserts: for T8 / T10 / T15 / T20 / T25 / T27 / T30
4 Tips: PZ1 / PZ2 / PH1 / PH2
3 Slot Attachments: 4 / 5.5 / 6.5
Hex Socket Bit Inserts ( Hex Wrench): 3/4/5/6mm
3. Hex Wrench: 1.5 / 2 / 2.5mm 

1/2in (12.5mm)
Attachments (nut) in Sizes: 10/11/12/13/14/15/16/17/18/19/20/21/22/24/27/30/32mm
Attachments (nut) Long, in Sizes: 14/15/17/19/22mm
Star Socket Attachments: E10 / E11 / E12 / E14 / E16 / E18 / E20 / E24
Star Socket Bit Inserts: T40 / T45 / T50 / T55
4 Tips: PZ3 / PZ4 / PH3 / PH4
3 Slot Attachments: 8/10/12
Hex Socket Bits ( Hex Wrench): 7/8/10/12/14mm

Package List:
1/4in (6.3mm) 
Ratchet, Short Extension, Long Extension, Joint, Toggle, Screwdriver Socket Wrench
Attachments (nut) in Sizes: 4 / 4.5 / 5 / 5.5 / 6/7/8/9/10/11/12/13 and 14 Mm
Attachments Long in the Sizes: 6/7/8/9/10/11/12/13mm
Star Socket Attachments: E4 / E5 / E6 / E7 / E8
Star Socket Bit Inserts: for T8 / T10 / T15 / T20 / T25 / T27 / T30
4 Tips: PZ1 / PZ2 / PH1 / PH2
3 Slot Attachments: 4 / 5.5 / 6.5
Hex Socket Bit Inserts ( Hex Wrench): 3/4/5/6mm
3.  Hex Wrench: 1.5/2/2.5mm
 
1/2in (12.5mm) 
Ratchet, Short Extension, Long Extension, Joint, Toggle / Extension
Attachments (nut) in Sizes: 10/11/12/13/14/15/16/17/18/19/20/21/22/24/27/30/32mm
Attachments (nut) Long, in Sizes: 14/15/17/19/22mm
Star Socket Attachments: E10 / E11 / E12 / E14 / E16 / E18 / E20 / E24
1 Bit Holder
Star Socket Bit Inserts: T40 / T45 / T50 / T55
4 Tips: PZ3 / PZ4 / PH3 / PH4  
3 Slot Attachments: 8/10/12 
Hex Socket Bits ( Hex Wrench): 7/8/10/12/14mm
1 Tool Case

Features

1、Made of high quality chrome-vanadium steel, and it is ideal for everyday needs in the workshop. One set for all applications. 2、With Super Lock/ wave shape. 3、 Due to the new wave shape, the tightening pressure is completely transferred to the surfaces of the screw head or nut. 4、The power transmission is about 15% higher. 5、No over-turning of the head or nuts possible, easy loosening of damaged nuts or screw hexagonal.

Package Dimensions:
Length: 17.00 cm
Width: 9.00 cm
Height: 7.00 cm

Package Dimensions:
Length: 24.00 cm
Width: 13.00 cm
Height: 8.00 cm

Item Type: Door Wing Mirror Cover

Material: ABS

Color: Glossy black

Fitment:

Replacement for Tesla Model 3 2017‑2021

Features

1、Fitment: The door wing mirror cover is a replacement for Tesla Model 3 2017‑2021, please check the model and year of manufacturing before ordering. 2、Decorative: The glossy black style makes the original dull rearview mirror shell base more eye catching and enhances the overall appearance of the car. 3、Premium Material: The product is made of ABS material, which is smooth, clear, sturdy and anti break. The edges are rounded to prevent accidental scratches. 4、Effective Protection: It can effectively protect the rearview mirror from scratches, dirt and other damage, and can provide a clear field of vision for driving. 5、Easy Installation: Easy to install, no modification, cutting, or drilling required. It adopts original standard, which is a perfect replacement and can perfectly match to your car.

Package List

2 x Wing Mirror Lower Holder

Package Dimensions:
Length: 26.00 cm
Width: 10.00 cm
Height: 3.00 cm

Specification

• Made with high quality ABS plastic for maximum durability.
• Precise design, wear resistance and anti-corrosion.
• Especially designed for Glide Touring 1994-2017.
• Easy installation without extra adjustment.
• Reflects headlight for increased visibility,great for night visibility.

Features

1、Made with high quality ABS plastic for maximum durability 2、Precise design, wear resistance and anti-corrosion 3、Especially designed for Glide Touring 1994-2017 4、Easy installation without extra adjustment 5、Reflects headlight for increased visibility,great for night visibility

Package Dimensions:
Length: 38.00 cm
Width: 5.00 cm
Height: 4.00 cm

Specification

• Including wiper arm and blade, a perfect set to help clean your rear window.
• Premium plastic and flexible soft layer design, smooth and silent wiping.
• Maximum contact field, complete cleaning.
• According to original model, perfectly fit in and easy to install.
• Made from hard and high quality materials, it is durable for long time use.

Features

1、Including wiper arm and blade, a perfect set to help clean your rear window 2、Premium plastic and flexible soft layer design, smooth and silent wiping 3、Maximum contact field, complete cleaning 4、According to original model, perfectly fit in and easy to install 5、Made from hard and high quality materials, it is durable for long time use

Package Dimensions:
Length: 5.00 cm
Width: 4.00 cm
Height: 3.00 cm

Item Type: Banjo Bolt Adapter Assembly
Material: Aluminum + Rubber
Color: Black
Specification: AN-6 (6AN) to ORB-8 (3/4in UNF)

Features

1、Purpose: Used to incorporate an aluminum ORB‑8 (3/4in UNF) banjo bolt into the AN‑6 banjo adapter. 2、Swivel Design: The banjo bolt can swivel in the assembly for easy orientation of the banjo. 3、Low Height: Low height design makes it ideal for tight spaces. The pressure test exceeds 50 BAR. 4、High Quality Materials: Made of high quality aluminum and rubber, corrosion resistant, rust proof and durable. 5、Reliable to Use: Each component is precise machined to achieve precise tolerances to achieve trouble free performance.

Package List

1 x Banjo Adapter

1 x Gasket

Package Dimensions:
Length: 17.00 cm
Width: 16.00 cm
Height: 16.00 cm

Item Type: Air Filter
Material: Canvas + aluminum alloy + plastic
Size: Approx. 16 x 16 x 15cm / 6.3 x 6.3 x 6in

Features

1、High Flow: The 76mm air filter provides high flow filtration, which helps to further optimize engine performance for improved power and fuel efficiency. 2、Efficient Filtration: The air cleaner effectively removes pollutants and fine dust particles from the air, allowing the engine to breathe in cleaner air for better combustion and performance. 3、Durable Construction: The 76mm air filter is built to last and is designed to withstand the harsh operating environment of an engine without sacrificing performance. 4、Strong Protection: The air filter can protect the engine, prevent the engine important parts from being worn out and prolong the service life. 5、Easy to Install: The engine air intake filter is simple to operate, no cutting or splicing, no complicated operations, convenient for using.

Package List

1 x Air Filter

Package Dimensions:
Length: 17.00 cm
Width: 13.00 cm
Height: 11.00 cm

Features

1、The replacement OEM part number is 3B4839015A. Especially fit for Bora production year: 1998-2005. 2、Easy and simple installation. Direct replace the shabby or worn one. 3、Exquisite workmanship, stable performance, high reliability. 4、Helps to restore the ease and convenience of locking or unlocking your vehicle's doors. 5、Superior and good quality materials, solid, durable and wear-resistant.

Package List

1 x Door Lock Actuator