Package Dimensions:
Length: 54.00 cm
Width: 31.00 cm
Height: 9.00 cm

Item Type: Front Bumper Side Air Vent Trim

Product Material: ABS
Product Color: Bright black
Application: 

Fit for X3 X4 G01 G02 M Sport LCI 2022-2024 (for M Sport bumpers only)

Features

1、Applicable Model: Front bumper spoiler trim cover is replacement for X3 X4 G01 G02 M Sport LCI 2022 to 2024, please confirm whether your model is applicable before buying. 2、Increase Aerodynamics: It can increase the downforce of the vehicle and improve the stability of the vehicle at high speeds. This is very attractive for car owners who like to drive at high speeds or participate in track races. 3、Fine Workmanship: Manufactured with durable materials and fine workmanship, it has superior durability. This ensures that it can maintain good appearance and performance for a long time. 4、Increase Driving Pleasure: The front bumper knife is more than just an ornament, it also enhances the appearance and performance of the vehicle, increasing driving pleasure and safety. 5、Simple Installation: Side air vent cover does not require professional installation skills, you can complete the installation independently, saving time and effort.

Package List

2 x Front Bumper Side Air Vent Trim

Package Dimensions:
Length: 8.00 cm
Width: 6.00 cm
Height: 1.00 cm

Item Type: Lift Pull Ring
Material: 304 Stainless Steel
Product Color: Stainless Steel Color
Product Overall Size: Approx. 76 x 57 x 8.4mm/3 x 2.2 x 0.3in

Features

1、Perfect surface flush installation, keep flush with the base, easy to install, requires 4pcs No. 8 screws(not included). 2、Made of 304 stainless steel, strong, wear‑resistant and durable, suitable for harsh environments. 3、Humanized design, the width of the pull ring is just enough for your two fingers to penetrate for lifting. 4、When you use the pull ring to lift the hatch, you can easily bring out all the strength of your entire arm. 5、Practical hardware accessories, applicable to a wide range, can be used for your yacht, hatch, deck cover, etc.

Package List

1 x Lift Pull Ring

Package Dimensions:
Length: 8.00 cm
Width: 4.00 cm
Height: 2.00 cm

Item Type: Fuel Injector Connector Harness

Material: ABS

Fitment:

Replacement for Jeep Wrangler (JK) (2007-2011) w/ 3.8L engine; Fuel injector.
Replacement for Jeep Wrangler (JK) (2007-2017); Rear Wheel Speed Sensor.
Replacement for Jeep Wrangler (TJ) (1997-2004) w/ 4.0L engine; Fuel injector.
Replacement for Jeep Wrangler (TJ) (2003-2006) w/ 2.4L engine; Fuel injector.
Replacement for Jeep Cherokee (XJ) (1997-2001) w/ 4.0L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WG) (2001-2004); WG (Europe) model w/ 4.0L or 4.7L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WJ) (1999-2004); Left Rear Wheel Speed Sensor.
Replacement for Jeep Grand Cherokee (WK) (2005-2010); Left Rear or Right Rear Wheel Speed Sensor.
Replacement for Jeep Grand Cherokee (WK) (2005-2010) w/ 3.7L or 5.7L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WK) (2011-2017) w/ 5.7L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WK) (2005-2007) w/ 4.7L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WK) (2005-2010) w/ 5.7L engine; Fuel injector.
Replacement for Jeep Grand Cherokee (WK) (2006-2010) w/ 6.1L engine; Fuel injector.
Replacement for Jeep Commander (XK) (2006-2010) w/ 3.7L or 5.7L engine; Fuel injector.
Replacement for Jeep Commander (XK) (2006-2007) w/ 4.7L engine; Fuel injector.
Replacement for Jeep Commander (XK) (2006-2010); Left Rear or Right Rear Wheel Speed Sensor.
Replacement for Jeep Liberty (KJ) (2002-2005) w/ 2.4L engine; Fuel injector.
Replacement for Jeep Liberty (KJ) (2002-2007) w/ 3.7L engine; Fuel injector.
Replacement for Jeep Liberty (KK) (2008-2012) w/ 3.7L engine; Fuel injector.
Replacement for Jeep Liberty (KJ) (2002-2007); Left Front or Rear Wheel Speed Sensor.
Replacement for Jeep Liberty (KK) (2008-2010); Rear ABS Sensor.
Replacement for Ram 1500 (DR) (2002-2008) w/ 3.7L or 4.7L engine; Fuel injector.
Replacement for Ram 1500/2500/3500 (DR) (2004-2008) w/ 5.7L engine; Fuel injector.
Replacement for Ram 1500 (DX) (2009); DX model (Mexico) w/ 4.7L engine; Fuel injector.
Replacement for Ram 1500 (DS) (2009-2010) w/ 3.7L engine; Fuel injector.
Replacement for Ram 1500 (DS) (2009-2011) w/ 4.7L or 5.7L engine; Fuel injector.
Replacement for Ram 2500 (DJ) (2010-2011) w/ 5.7L engine; Fuel injector.3500 Cab & Chassis (DD) (2011) w/ 3.7L engine; Fuel injector.
Replacement for Dodge Dakota (AN) (2000-2004) w/ 4.7L engine; Fuel injector.
Replacement for Dodge Dakota (ND) (2005-2011) w/ 4.7L engine; Fuel injector.
Replacement for Dodge Dakota (ND) (2004-2010) w/ 3.7L engine; Fuel injector.
Replacement for Dodge Raider (NM) (2006-2009) w/ 3.7L engine; Fuel injector.
Replacement for Dodge Raider (NM) (2008-2010) w/ 4.7L engine; Fuel injector.
Replacement for Dodge Durango (WD) (2011-2013) w/ 5.7L engine; Fuel injector.
Replacement for Dodge Durango (HB) (2004-2009) w/ 3.7L or 4.7L engine; Fuel injector.
Replacement for Dodge Durango (DN) (2000-2003) w/ 4.7L engine; Fuel injector.
Replacement for Dodge Magnum (LX) (2005-2008) w/ 2.7L, 3.5L, 5.7L or 6.1L engine; Fuel injector.
Replacement for Dodge Charger (LD) (2011-2017) w/ 5.7L engine; Fuel injector.
Replacement for Dodge Charger (LX) (2005-2010) w/ 2.7L, 3.5L, 5.7L or 6.1L engine; Fuel injector.
Replacement for Dodge Challenger (LA) (2015-2017) w/ 5.7L engine; Fuel injector.
Replacement for Dodge Challenger (LC) (2009-2014) w/ 5.7L engine; Fuel injector.
Replacement for Dodge Challenger (LC) (2009-2010) w/ 3.5L engine; Fuel injector.
Replacement for Dodge Challenger (LC) (2008-2010) w/ 6.1L engine; Fuel injector.
Replacement for Chrysler Aspen (HG) (2007-2009) w/ 4.7L or 5.7L engine; Fuel injector.
Replacement for Chrysler 300 (LX) (2011-2017) w/ 5.7L engine; Fuel injector.
Replacement for Chrysler 300 (LX) (2005-2010) w/ 2.7L, 3.5L, 5.7L or 6.1L engine; Fuel injector.
Replacement for Chrysler 300 (LE) (2006-2010); LE (Europe) model w/ 5.7L or 6.1L engine; Fuel injector.

Features

1、Applicable Model: The fuel injector connector harness is a replacement for Jeep Wrangler (JK) 2007‑2011, replacement for Ram 1500 2500. 2、Function: The fuel injector wiring harness is perfectly connected to the fuel injector and is used to transmit signals and power to the electronic control module of the engine. 3、High Performance: This is a complete wiring harness for engine fuel injectors with connectors to provide the best quality and performance for your truck or bus. 4、Quality Ensured: All part is subjected to a quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new part. 5、Easy to Install: Plug and play, adopts original standard, perfect replacement for the old or broken one, improving the time efficiency.

Package List

1 x Fuel Injector Connector Harness

Package Dimensions:
Length: 102.00 cm
Width: 33.00 cm
Height: 28.00 cm

Features

1、Constructed of high quality carbon fiber material, which has good toughness and is not easy to deform. 2、Exquisite craftsmanship, strong texture, clear grain, and stylish appearance. 3、A great decoration that enhances the visual and touch feeling of your car. 4、100% true 3K vacuum dry carbon fiber, increases the 3D stereo effect and highlights the personality. 5、Designed to fit for Ford Mustang All Model 2014-2018.

Package List

1 x Dashboard Trim

Package Dimensions:
Length: 12.00 cm
Width: 10.00 cm
Height: 3.00 cm

Item Type: Mileage Speed Sensor
Material: ABS plastic

Part Number: 7020-150400
Fitment: Replacement for CFMOTO CFX8 CF800 800CC ATV 800

Features

1、Perfect Fitment: Mileage speed sensor is replacement for CFMOTO CFX8 CF800 800CC ATV 800, perfect matching. 2、Replace Part Number: The part number of ATV speed sensor is 7020‑150400, according to original standard. 3、High Quality Material: Speed sensor is made of high quality ABS plastic material, wear resistant, anti aging, rugged and durable. 4、Professional Design: Professional manufacturing, exquisite workmanship, ensure stable performance and high reliability. 5、Easy Installation: Easy to install without complicated operations, convenient for using, save your time and energy.

Package List

1 x Mileage Speed Sensor

Package Dimensions:
Length: 11.00 cm
Width: 9.00 cm
Height: 7.00 cm

Item Type: Ball Joint Set
Material: 4130 aero-grade chromium steel

Quantity: 1 set (contains 4 ball heads and 4 washers, 4 pins)

OEM: 51355-HP5-601, 37S-23549-01-00, 706200653
Fitment:
Replacement for FourTrax 300 TRX300 1993-2000 

Replacement for FourTrax 300 TRX300FW 1988, 1990-2000
Replacement for Foreman 400 TRX400FW 1995-2003    

Replacement for Can-Am Traxter XT 2005
Replacement for Can-Am Traxter 500 XL 2001-2005
Replacement for Can-Am Traxter 500 5 Speed 2005
Replacement for Can-Am Renegade 800 X 2008-2011
Replacement for Can-Am Renegade 800R X 2009
Replacement for Can-Am 2005     

Replacement for Yamaha Grizzly 350 YFM350 2014
Replacement for Yamaha Big Bear 400 YFM400 2000-2002 2004
Replacement for Yamaha Big Bear 400 YFM400F 2000-2002 2004-2006
Replacement for Yamaha Big Bear 400 YFM400H Hunter 2002
Replacement for Yamaha Rhino 700 YXR700FSP2 Special Edition II FI 2008 2010
Replacement for Yamaha Big Bear 400 YFM400FW 2003
Replacement for Yamaha Rhino 660 YXR660FA 2004-2007
Replacement for Yamaha Rhino 660 YXR660FSE 2007   

Features

1、EXCELLENT REPLACEMENT: Ball joints, perfect replacement for FourTrax 300 TRX300 1993‑2000 to better meet your demands. 2、PART NUMBER: Reference OEM number is 51355‑HP5‑601, 37S‑23549‑01‑00, 706200653. 3、HEAVY DUTY CONSTRUCTION: Made of aero‑grade chromium steel, strong corrosion resistance, rugged and durable. 4、GOOD PERFORMENCE: Direct replacement for the old or damaged ball joints, offers better performance. 5、EASY INSTALLATION: Easy to install, no complicated tools required, convenient to use, save time and effort.

Package List

4 x Ball Joint

4 x Insert Pin

4 x Gasket

4 x Washer

Package Dimensions:
Length: 14.00 cm
Width: 7.00 cm
Height: 7.00 cm

Specification

• 7Pcs High Quality Aftermarket 5HP19 Transmission Solenoid Kit.
• Excellent mechanical stability and corrosion protection.
• Professional manufacturing, high accuracy.
• A direct replacement for your old or broken one, perfect fit in.
• Easy to install, fit for BMW AUDI Prosch.

Features

1、7Pcs High Quality Aftermarket 5HP19 Transmission Solenoid Kit. 2、Excellent mechanical stability and corrosion protection. 3、Professional manufacturing, high accuracy. 4、A direct replacement for your old or broken one, perfect fit in. 5、Easy to install, fit for BMW AUDI Prosch.​

Package Dimensions:
Length: 131.00 cm
Width: 38.00 cm
Height: 9.00 cm

Condition: 100% Brand New
Item Type: Rear Trunk Lid
Material: ABS
Color: Glossy Black
Finish: High Gloss UV Protected Clear Coat
Type: for PSM Style Duckbill Spoiler
Fitment:
Fit for Mercedes-Benz C-Class W205 2015-2020
Fit for Mercedes-AMG W205 C43/C63/C63S 2015-2020
(Only For 4-Door W205 Sedan Models, Not For 2-Door C205 A205 or 5-Door S205 Models!)

Fitting Instructions:
1. Make sure that the mounting surface is deaned thoroughly afterward.
2. Test fit the spoiler prior to installing.
3. Line up the spoiler on the trunk and mark its proper positioning with painter's tape.
4. Peel the red backing of the tape approximately 2 inches from either side of the spoiler.
5. Place the spoiler on the car without removing all of the red backing of the tape.
6. Once you have the spoiler aligned into the correct position, carefully remove the red backing of the tape while the spoiler is simultaneously being pressed firmly into place. It is recommended that two people complete this step.
7. Apply pressure to the spoiler after it is installed with painter's tape, with extra attention given to the corners. It is recommended that you do not drive the car until the spoiler is given time to solidify firmly to the trunk.

Features

1、Fit for Mercedes‑Benz C‑Class W205 15‑20/for Mercedes‑AMG W205 C43/C63/C63S 15‑20. 2、Offering better aerodynamics, reduce drag, improve fuel efficiency, enhance downforce, tire traction and driving stability. 3、Adopt a mixture of fiberglass and ABS engineering plastic, ensures long durability, colorfast and anti‑UV. 4、Provided 2pcs double‑sided tape, easy and fast for installation, no need of modifications to the existing bodywork. 5、Meticulous workmanship, glossy black color, adds a luxurious and fashionable look to your vehicle.

Package List

1 x Rear Trunk Spoiler

2 x Double-Sided Tapes

Package Dimensions:
Length: 18.00 cm
Width: 14.00 cm
Height: 5.00 cm

Item Type: Inflatable Pillow
Material: PVC + Flocking

Features

1、Press to inflate the pillow, no need of blow by mouth, more sanitary, and more convenient to operate and carry out. 2、Double buttons design brings you adjustable service, sufficing your different using needs. 3、The upgraded anti‑leakage nozzle design with glue sealing edge design, effectively ensure stability and prevent leakage problem. 4、The PVC material with furry surface, bringing comfortable and warm using experience, perfect for winter usage. 5、The inflatable pillow is widely suitable for airplane, car, office, trains, home and so on, to meet your different needs.

Package List

1 x Inflatable Pillow

Package Dimensions:
Length: 7.00 cm
Width: 7.00 cm
Height: 3.00 cm

Item Type: Water Pump Impeller
Blade: 6
Material: Metal, Rubber
OE Number: 396809, 777214, 18-3368, 500346
Depth/Height/Width: Approx. 22mm/0.9in
Outer Diameter/Outer Impeller Diameter: Approx. 70mm/2.8in
Inner Shaft Insert/Hub Diameter: Approx. 16mm/0.6in
Fitment:
Replacement for Johnson Evinrude/ Replacement for OMC 2 stroke 35-55 HP Outboard Water Pump Impeller 
For 35HP 1986-1999
For 40HP 1986-1988
For 45/55HP 1989
For 45/55HP Commercial 1986-1988 1990-1994
For 48HP 1987-1988
For 50HP 1986-1988

Features

1、Applicable Model: The water pump impeller is replacement for Johnson Evinrude or replacement for OMC outboard water pump impeller 2 stroke 35 to 55 HP, for 35HP 40HP 45/55HP 48HP 50HP. 2、OE Number: The part numbers for reference are 396809, 777214, 18‑3368, 500346. Please confirm whether it is consistent with the OE you need to avoid wrong buying and other problems. 3、Efficient Water Flow: This 6 blade water pump impeller is designed to provide efficient water flow in your outboard engine, ensuring optimal cooling and performance. 4、Durable Construction: Built to withstand harsh marine environments, resistant to deterioration, stable and reliable, ensuring long lasting durability. 5、Ideal Replacement: Direct replacement installation, meets or exceeds OEM standards for the replacement of old and damaged one on original vehicles.

Package List

1 x Water Pump Impeller

Package Dimensions:
Length: 20.00 cm
Width: 20.00 cm
Height: 10.00 cm

Item Type: Air Filter

Material: ABS

OE Number: 11013-1290, 11013 7048, 119655 12560, 1G659 11222, 6A10082630 6A1008263

AIR filter replacement for KOHLER replace OEM:

Replacement for ARIENS: 21512500, 21548200

Replacement for BOBCAT: 4163715, 4164152, 6673752

Replacement for 820263

Replacement for CASE: 6191362M1

Replacement for CATERPILLAR: 139 4834
Replacement for CLUB CAR: 102558201
Replacement for E-Z-GO: 28463G01
Replacement for EXMARK: 93-2195
Replacement for FERRIS: 5100192
Replacement for GENIE: 52867
Replacement for GRAVELY: 21512500
Replacement for GROVE: 9304100163
Replacement for JACOBSEN: 5000913
Replacement for JOHN DEERE: M113621, MIU10783
Replacement for KOHLER: 25 083 02, 25 083 02-S
Replacement for KOMATSU: 119655-12560
Replacement for KUBOTA: 1G659-11222, 6A10082630, 6A10082632, K1211 82320, K2581 82311
Replacement for MASSEY FERGUSON: 6191362H1
Replacement for ONAN: 140 3071
Replacement for SKYJACK: 137924
Replacement for TORO: 108-3811, 93 2195
Replacement for WALKER: 5090 1

Applicable Models:

Replacement for BOBCAT: 453, 463 SKID STEERS 319, 320D, 320G, 321, 322D, 323, 324, 418 SKID STEER LOADERS, CT120, CT122 COMPACT TRACTORS, E08, E10, E14, E16 COMPACT EXCAVATORS, MT50 AND MT52 MINI TRACK LOADERS

Replacement for 385777, 386442, 386446 AND 386447

Replacement for CLUB CAR: PRECEDENT
Replacement for DITCHWITCH: 1030, 1230 AND 1330
Replacement for EXMARK: LAZER Z 
Replacement for E-Z-GO: 4-CYCLE ST350 WITH 350CC AND 395CC ENGINES 1996 AND NEWER, GAS
Replacement for FERRIS: COMFORT CONTROL DD SERIES AND EVOLUTION SERIES
Replacement for GENIE: GS-2668 RT, GS-3268 RT, Z-34 22 BI-ENERGY AND IC, Z-45 25 DC BI-ENERGY
Replacement for GRAVELY: PM260Z AND PM360
Replacement for JOHN DEERE: 2020 AND 2020A, 2030 AND 2030A PROGATORS, 1200 HYDRO RAKE AND GATOR TXTURF, 2500 AND 2500A DIESEL TRI-PLEX GREENS MOWERS, 2500B AND 2500E HYBRID DIESEL RIDING GREENS MOWERS, 2653 AND 2653A DIESEL PROFESSIONAL UTILITY MOWERS

Replacement for FH541 17 HP KAI, FH580 19 HP, FX481V, FX541V AND FX600V ENGINES. FITS MULE UTVS
Replacement for KOHLER: CH25, CH26 AND TH16 (CANISTER MODELS ONLY) CV460-CV493, TH16, TH18, TH520, TH575 AND TRIAD OHC
Replacement for KUBOTA: BX SERIES, D662, D722 [NON-TURBO], D782, D902, DF752, DF972, KTV900, RTV500, RTV900, WG752, WG972, Z482 AND Z602

Replacement for TORO: GREENSMASTER 3200, 3200D, 3250D, GROUNDS PRO 2000D, REELMASTER 2000D, 2300D, 2600D, 3100D, WORKMAN 1100, 2100, 2110, MDX, 3210, 3220, 3300D, 4200 AND 4300D, 1999 AND NEWER; 3310D, 3220D, 3420, HDX, HDX-D, SAND PRO 2020, 3020, 3040, 5000, 5020 AND 5040

Features

1、Fitment: Air filter is replacement for BOBCAT 453, 463 SKID STEERS 319, 320D, 320G, 321, 322D, 323, 324, 418 SKID STEER LOADERS, CT120, CT122 COMPACT TRACTORS, E08, E10, E14, E16 COMPACT EXCAVATORS, MT50 AND MT52 MINI TRACK LOADERS. 2、OE Number: Air cleaner replace part number is 11013 1290, 11013 7048, 119655 12560, 1G659 11222, 6A10082630, 6A1008263. Please check the part numbers whether it suits your vehicle before purchasing. 3、Function: The filter provides clean air to the machinery and equipment to prevent the machinery and equipment from inhaling air with impurity particles in the work 4、Ideal Replacement: The manufacturing process is fully compliant with OE specifications, and the air filter has undergone extensive experimentation and assembly testing, making it an excellent replacement. 5、Simple Installation: The installation is simple, direct replacement for the old or broken one, no modification is required, convenient for using.

Package List

2 x Air Filters

Package Dimensions:
Length: 6.00 cm
Width: 5.00 cm
Height: 3.00 cm

Item Type: Turbo Oil Feed Line Connector Joint

Material: Metal alloy

Thread: Internal thread

Fitment:

Replacement for Dodge 1989‑1998

Replacement for Cummins

Features

1、Fitment: The turbo oil feed line connector joint is a replacement for Cummins, replacement for Dodge 1989‑1998, please check the model before ordering. 2、Material: With internal thread design, high strength metal alloy material, durable and wear resistant, not easy to break, perfect for the original worn or damaged joints. 3、Perfect Fit: Perfectly adapt to the turbine fuel supply pipe of the specific model, improve the efficiency of the turbine work, and restore the normal operation of the car. 4、Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability. 5、Easy to Install: Stringently manufactured to meet the original standard, perfect replacement for the old or broken one, improving the time efficiency.

Package List

2 x Turbo Oil Feed Line Connector Joint

2 x Gasket

Package Dimensions:
Length: 12.00 cm
Width: 12.00 cm
Height: 2.00 cm

Condition: 100% Brand New
Item Type: Engine Washer Bolt Kit
Material: Aluminum Alloy + Iron
Color: As Pictures Shown
Fitment:
1992 - 2001 fit for Acura Integra (GS-R)
1997 - 2001 fit for Acura Integra (Type R)
1999 - 2000 fit for Honda Civic Coupe (Si)
1994 - 1997 fit for Honda Del Sol (VTEC)

Fit for Honda Civic B series

Features

1、Features with excellent mechanical stability and corrosion resistance. 2、Especially designed to fit for Acura Integra (GS‑R) 1992 ‑ 2001. 3、Produced with the highest quality materials, reliable, firm, and long service life. 4、Easy and simple installation, providing you much convenience when in use. 5、This engine washer bolt kit is manufactured to meet standard specification.

Package List

1 x Engine Washer Kit

Package Dimensions:
Length: 42.00 cm
Width: 29.00 cm
Height: 24.00 cm

Item Type: Tail Lights

Material: ABS+PMMA+PC

Function: Brake light, reverse light, driving light, turn signal light
Light Color: Red, white, amber 

Fitment:

Replacement for Toyota Land Cruiser Prado LC90/LC95 1996-2004

Features

1、Applicable Models: Tail light is replacement for Toyota Land Cruiser Prado LC90 LC95. Please confirm whether your model is applicable before buying. 2、High Brightness: Tail lamp with high brightness provides visibility to rear vehicles and pedestrian to the car, can warn rear vehicles and pedestrians to avoid collision and improve driving safety. 3、IP67 Weatherproof: Our LED taillights are constructed from premium ABS housings and fully sealed beams that are IP67 weatherproof, ensuring considerable durability in heavy rain or bad weather. 4、Energy Saving and Environmental Protection: Tail light lamp adopts energy efficient LED light source, which can effectively reduce energy consumption, lower the pressure on the car battery and prolong the battery life. 5、Stylish Appearance: Turn signal tail lamp is adopted with fashionable design to complement the car style, which aesthetically enhances the overall uniqueness.

Package List

2 x Tail Lights

2 x Wiring Harnesses

Package Dimensions:
Length: 54.00 cm
Width: 7.00 cm
Height: 1.00 cm

Item Type: Headlight Eyebrow
Material: Plastic(soft)
Fitment: Replacement for 3 Series E90 2009-2012

Features

1、Perfect Fitment: Headlight eyelid decal trim is replacement for 3 Series E90 2009‑2012, perfect matching your car, has a long service time. 2、Premium Material: Headlight eyebrow is made of premium soft plastic material, wear resistant, easy to clean and has a long service time. 3、Excellent Performance: Professional manufacturing, exquisite workmanship, not easy to crack or break, stable performance and high reliability. 4、Stylish Design: Piano black surface, glossy appearance, looks luxurious and elegant, keep your original trims and enjoy the aesthetics. 5、Simple Installation: The installation is simple, no complicated operation is required, convenient for using, save your time and energy.

Package List

2 x Headlight Eyebrow

Package Dimensions:
Length: 15.00 cm
Width: 12.00 cm
Height: 7.00 cm

Features

1、Better Heat Dissipation: The high efficiency heat dissipating aluminum alloy housing extends the life of the light pod to more than 50,000 hours, and the shockproof PC lens can withstand harsh outdoor conditions. 2、Protection Grade: Off road work light has IP67 waterproof rate, good sealing design can effectively prevent water, can be used in most weather conditions, durable. 3、Adjustable Mounting Bracket: Equipped with a 180° adjustable mounting bracket, you can flexibly change the direction of the light according to your needs. 4、Universal Application: LED work light has wide range of applications, perfect for offroad, SUV, ATV, UTV, truck, pickup, marine, boat etc., 5、No Blind Spots: The unique dual LED side shooter pod design effectively eliminates blind spots, provides you with maximum visibility, and upgrades your driving experience.

Package List

1 x LED Offroad Light

Package Dimensions:
Length: 16.00 cm
Width: 10.00 cm
Height: 5.00 cm

Item Type: Motorcycle Foot Pegs
Material: CNC Aluminium

Size: Approx. 140 x 38 x 22mm/5.5 x 1.5 x 0.9in
Fitment:

Fit for Vespa GT 125
Fit for Vespa GT 200
Fit for Vespa GT 60 250ie
Fit for Vespa GT 125 L
Fit for Vespa GT 125 L Euro 3
Fit for Vespa GT 200 L
Fit for Vespa GTS 125ie Super
Fit for Vespa GTS 250 ABS
Fit for Vespa GTS 250
Fit for Vespa GTS 300ie Super
Fit for Vespa GTS 250ie
Fit for Vespa GTS 300ie
Fit for Vespa GTS 125 Euro 3
Fit for Vespa GTS150
Fit for Vespa GTS 300ie Super Tour
Fit for Vespa GTV 125
Fit for Vespa GTV 250
Fit for Vespa GTV 300

Features

1、Rear pedal with foldable design, installed on the engine guard to obtain a more comfortable riding position. 2、Made of high‑quality CNC aluminum, corrosion‑resistant, durable and sturdy. 3、Stylish and fashionable pedals, can enhance your motorcycle appearance. 4、Specially fit for Vespa GT 125/200/60 250ie/125 L/200 L, fit for Vespa GTS, fit for Vespa GTV 125/250/300, etc. 5、Easy installation with no additional hardware, a great replacement for the previous old or broken one.

Package List

2 x Motorcycle Foot Pegs

Package Dimensions:
Length: 12.00 cm
Width: 3.00 cm
Height: 2.00 cm

Item Type: Boat Cleat

Material: 316 stainless steel

Color: Silver
Surface mirror polish
Application: Yacht accessories

Suitable for marine boat yacht fitting hardware 

Features

1、It is made of high‑quality 316 stainless steel, which is corrosion‑resistant, durable and not easy to damage. 2、The surface is highly polished, smooth and textured, which can match modern ships/boats/yachts. 3、The installation is simple, does not require complicated tools, is convenient to use, and will not waste your time. 4、Suitable for marine boat yacht fitting hardware, nice and practical accessory. 5、Built to strict quality control standards, design improved for high quality and good performance.

Package List

1 x Boat Cleat

Package Dimensions:
Length: 9.00 cm
Width: 9.00 cm
Height: 9.00 cm

Item Type: Gear Shift Module
Material: ABS
OEM: LR047388, LR117066, LR083664, LR096232, LR050469, LR060306, LR066520, LR068891, EJ327E453CA, EJ327E453CB, EJ327E453CC
Fitment: 

Replacement for Range Rover Evoque L538 2012-2018
Replacement for Discovery Sport L550 2014+

Features

1、Vehicle Fitment: Replacement for Range Rover Evoque L538 2012‑2018; Replacement for Discovery Sport L550 2014+. Please confirm whether your model is applicable before buying. 2、OEM Numbers: LR047388, LR117066, LR083664, LR096232, LR050469, LR060306, LR066520, LR068891, EJ327E453CA, EJ327E453CB, EJ327E453CC are the reference part numbers. 3、Smooth Shift: The gear shifter module assembly controls vehicle's automatic gear shifter, which enables smooth shifting, bringing a more pleasant driving experience. 4、Sturdy Construction: Gear shifter module assembly is made from ABS material, scratch resistant, high toughness, make sure high reliability and superior performance. 5、Excellent Replacement: Professional manufacturing, this gear shift module is your ideal option and replacement for your rebuild, repair, and maintenance needs.

Package List

1 x Gear Shift Module Assembly

Package Dimensions:
Length: 14.00 cm
Width: 11.00 cm
Height: 7.00 cm

Features

1、170 ° wide‑angle lens, provides wider view for you, effectively enhance driving safety. 2、Support 720P high‑resolution recording, clear and vivid picture quality. 3、With a built‑in speaker, which has loud and hifi sound, great using experience. 4、Seamless loop recording function, no need to worry about insufficient memory. 5、Simple installation, no need complicated tools, convenient for using.

Package List

Package Dimensions:
Length: 20.00 cm
Width: 14.00 cm
Height: 4.00 cm

Features

1、Perfect Fitment: Motorcycle mudguard extension is replacement for Ducati Scrambler 800 2014‑2020, perfect matching. 2、High Quality Material: Mud guard extender is made of high quality plastic material, lightweight, high temperature resistant, sturdy and durable. 3、Protection: Front mudguard extender effectively protects the legs of the passenger from water and airborne debris, can also protect the chain. 4、Original Standard: According to original standard, professional manufacturing, exquisite workmanship, stable performance and high reliability. 5、Easy Installation: Easy to install, you can directly replace the old or broke one, no modification is required, save your time and energy.

Package List

1 x Front Mudguard Extension

Package Dimensions:
Length: 37.00 cm
Width: 27.00 cm
Height: 26.00 cm

Features:
3 Ways To Wear: Inner sun visor/full face/half helmet. Inner sun visor is sunshading and anti-glare, and can expand your horizons; full face is wind and noise reduction; half helmet is cool and breathable, which clears your vision.
Premium Quality Materials: Brand new with good performance. Made from premium-quality ABS materials, reliable performance and superior longevity. Highly breathable fibres offer a comfortable way to have breathable air between the head and helmet, can be easy to remove and wash. Cellular design makes the inner multilayered security conservation reduce the feeling of being overwhelmed, comfortable and skin-friendly.
Dual Visor: The outside visor and inner sun visor can be respectively flipped up and down, which can offer you dual conservation. The outside visor can be opened and closed 90° by pressing the side button and flipping up simultaneously.
Highly Breathable & Easy Operation: The ventilation switch can be adjusted freely and the omni-directional ventilation design ensures breezier riding. Quick and easy buckles, you can wear the helmet by buckling up within 3s.
User-friendly Design & Safe Riding: The helmet is with BT space on both sides, which is convenient for you to wear your Bluetooth headset during riding. The motorcycle helmet is of ergonomic design, which can offer better conservation to the rider.

Specifications:
Item Name: Motorcycle Helmet
Material: ABS+Fibre
Color: Red   
Head Circumference: 
Size M: 57-58cm/22.4-22.8in

Package Information: 
Package Size: 37 * 27 * 26cm
Package Weight: 2090g

Package List:
1 * Motorcycle Helmet
1 * Sun Visor

Features

1、3 Ways To Wear: Inner sun visor/full face/half helmet. Inner sun visor is sunshading and anti-glare, and can expand your horizons; full face is wind and noise reduction; half helmet is cool and breathable, which clears your vision. 2、Premium Quality Materials: Brand new with good performance. Made from premium-quality ABS materials, reliable performance and superior longevity. Highly breathable fibres offer a comfortable way to have breathable air between the head and helmet, can be easy to remove and wash. Cellular design makes the inner multilayered security conservation reduce the feeling of being overwhelmed, comfortable and skin-friendly. 3、Dual Visor: The outside visor and inner sun visor can be respectively flipped up and down, which can offer you dual conservation. The outside visor can be opened and closed 90° by pressing the side button and flipping up simultaneously.

Package List

1 * Motorcycle Helmet
1 * Sun Visor

Package Dimensions:
Length: 24.00 cm
Width: 14.00 cm
Height: 6.00 cm

Item Type: Front Fork Shock Covers

Material: Rubber

Applicable Models: Fit for ATC 250R 1983‑1986

Features

1、Vehicle Fitment: Front fork shock covers is fit for ATC 250R 1983‑1986, which is made according to the prototype model. 2、Protect Function: Rubber sleeve tubes boots are designed to protect the fork sliders and impact device from damage. 3、Performance: The fork covers can prevent pressure or moisture buildup and can also be used as decoration to make your motorcycle look unique and eye catching. 4、Anti Aging: Front fork covers gaiters are made of rubber material, tough, not easy to tear, aging resistance, not easy to damage. 5、Perfect Match: Rubber fork cover boots can be stretched or shortened, easy to install and replace, perfect match with your motorcycle.

Package List

1 x Pair of Front Fork Shock Covers

Package Dimensions:
Length: 40.00 cm
Width: 36.00 cm
Height: 10.00 cm

Features

1、Part Number: According to the original factory specifications, replacing reference OEM number is 970 552 151 01 5Q0. 2、Applicable Model: Dash panel cover with stopwatch, replacement for Panamera2010‑2016, please carefully check car model before buying. 3、Interior Upgrade: Black dash clock upper cover upgrades your car interior to add a more luxurious and unique dashboard appearance. 4、Accurate Adaptation: Opening mould in original car data, professionally built, ensures perfect match, high accuracy. 5、Non Destructive Installation: Made of high quality ABS material, sophisticated workmanship, rugged and durable, easy to install and disassembly.

Package List

Package Dimensions:
Length: 13.00 cm
Width: 9.00 cm
Height: 4.00 cm

Features

1、It is made of high quality aluminum alloy material. 2、Corrosion resistance, wear resistance and oxidation resistance. 3、Stable performance, long service life, worthy of your trust. 4、Easy to install, no complicated tools required. 5、Exquisite appearance, reasonable design, improved appearance of motorcycle.

Package List

2 x Motorcycle Handle Plug

Package Dimensions:
Length: 11.00 cm
Width: 8.00 cm
Height: 2.00 cm

Item Type: Motorcycle Foot Widening Stand

Material: Aluminium alloy

Fitment:

Fits for XMAX 400 300 250 125
Fits for NMAX155 NMAX155125
Fits for AEROX155
Fits for NVX155
Fits for TMAX530 DS DX

Features

1、Applicable Model: The motorcycle foot widening stand is a replacement for XMAX 400 300 250 125, for NMAX155 NMAX125, for AEROX155, for NVX155, for TMAX530 DS DX. 2、Stable Support: The motorcycle kickstand pad enlarger plate provides an increased surface area, preventing your bike from sinking into soft surfaces such as mud, sand, and grass. 3、Strong Build Construction: Constructed from high strength aluminum alloy material, this kickstand pad enlarger plate ensures durability and longevity. 4、Enhanced Protection: By evenly distributing the weight of the motorcycle, this kickstand pad reduces the risk of damaging the motorcycle due to it tipping or falling. 5、Easy Installation: No additional tools or professional expertise are required, comes with all necessary components and a simple guide for an effortless installment process.

Package List

1 x Motorcycle Foot Widening Stand

Package Dimensions:
Length: 8.00 cm
Width: 8.00 cm
Height: 7.00 cm

Item Type: Fuel Filter Water Separator Element
Material:
Filter: Filter Paper
Sealing Ring: Nitrile Rubber
OE Part Number:
R12P / FS19627 / P551768 / BF1381-O / S3240 / 18-7947 / BE924010
Replacement for Suzuki 99105-20006
Replacement for Honda 17670-ZW1-030GH
Replacement for Yamaha YMM-2E114-00
Fitment:

Widely used in yacht / outboard / truck / industrial and other small diesel engine applications

Replacement for Genie S100, S105, S120, S125 Lifts
Replacement for VHD430 Trucks

Features

1、With OE of R12P and FS19627, etc., fit for yacht, outboard, truck and other small diesel engine applications. 2、Using 3‑layer filter paper to provide higher dust holding capacity and longer service life. 3、Filter out 99% of water and 4 microns of impurities and pollutants, high efficiency and reliability. 4、Simple to install, convenient to use, directly replace the old fuel filter water separator. 5、Designed to have the same form, fit and function as OEM original fuel filter water separator.

Package List

1 x Fuel Filter Water Separator Element

1 x Sealing Ring

Package Dimensions:
Length: 12.00 cm
Width: 8.00 cm
Height: 7.00 cm

Features:
1. Made of quality ABS material for stable performance and maximum durability.
2. Built to strict quality control standards, dependable to use.
3. Designed to increase the performance and efficiency of your vehicle.
4. Easy to install on any engine, no modification needed, convenient for using. 
5. Practical accessory fits for Suzuki SV650 1999-2002.

Specification:
Condition: 100% Brand New 
Item Type: Ignition Coil
Material: ABS
Color: As Pictures Shown 
Fitment:
Fits for Suzuki Motorcycle
Fits for SV650 1999-2002
Fits for SV650S 1999-2002
 
Package List:
1 x Ignition Coil

Features

1、Made of quality ABS material for stable performance and maximum durability. 2、Built to strict quality control standards, dependable to use. 3、Designed to increase the performance and efficiency of your vehicle. 4、Easy to install on any engine, no modification needed, convenient for using. 5、Practical accessory fits for Suzuki SV650 1999-2002.

Package Dimensions:
Length: 19.00 cm
Width: 11.00 cm
Height: 4.00 cm

Features

1、Made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable 2、The puller can be bilateral rotation, enable laser stretching size and working space 3、Two jaw with adjustable clamping depth, fit for different size gears and bearings 4、Ideal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc 5、Comes with hexagonal screw and thread for fastening, non-silp and high strength

Package Dimensions:
Length: 36.00 cm
Width: 34.00 cm
Height: 14.00 cm

Specification

• Made of high quality iron material, high temperature resistance and durable in use.
• With the traditional 3 blade connector, GEN II throttle/shift cables design.
• Direct aftermarket parts, reference OEM number is 8M0059686.
• Easy to use, comes with 2 ft. trim harness for easy installation.
• For a single outboard and is furnished with single trim switch for trim and trailering.
• Fit for all current mariner outboards with integrated trim and newer force outboards 40 hp.

Features

1、Made of high quality iron material, high temperature resistance and durable in use. 2、With the traditional 3 blade connector, GEN II throttle/shift cables design. 3、Direct aftermarket parts, reference OEM number is 8M0059686. 4、Easy to use, comes with 2 ft. trim harness for easy installation. 5、For a single outboard and is furnished with single trim switch for trim and trailering.