Package Dimensions:
Length: 50.00 cm
Width: 32.00 cm
Height: 8.00 cm

Specification

• This item is made of quality ABS, lightweight, anti-rust, colorfast and durable.
• Fine surface processing creates gloss appearance, adding deluxe and elegant sense to it.
• Can prevent the surface of center gear shift panel from scratches, dust, etc.
• Exquisite workmanship, anti-scraping and wear-resistant.
• Self adhesive design, easy to attach it to car without peeling off.
• Nice car interior decorative accessory fit for BMW 5 Series F10 2011-2016.

Features

1、This item is made of quality ABS, lightweight, anti-rust, colorfast and durable. 2、Fine surface processing creates gloss appearance, adding deluxe and elegant sense to it. 3、Can prevent the surface of center gear shift panel from scratches, dust, etc. 4、Exquisite workmanship, anti-scraping and wear-resistant. 5、Self adhesive design, easy to attach it to car without peeling off.

Package Dimensions:
Length: 34.00 cm
Width: 4.00 cm
Height: 2.00 cm

Package Dimensions:
Length: 44.00 cm
Width: 44.00 cm
Height: 29.00 cm

Features

1、Practical accessory, suitable for truck, battery car and other vehicles cab heating. 2、The cooling fluid of engine can be preheated, avoid the engine abrasion when starting at low temperature. 3、Environmental protection, low emission, low fuel consumption. 4、Compact styling, easy to install and remove, convenient for using. 5、Volatile technology, using ceramic ignition plug to heat fuel to evaporate into gas, fast ignition, full combustion. 6、Fuel, electricity and temperature can be set at will, which can meet your different needs. 7、This heater has a constant temperature function, practical for using.

Package List

1 Set of Parking Heater

Package Dimensions:
Length: 14.00 cm
Width: 11.00 cm
Height: 5.00 cm

Item Type: RV Toolbox Handle Latch

External Size: Approx. 140 x 108mm/5.5 x 4.3in

Installation Hole Size: Approx. 75 x 110mm/3.0 x 4.3in
Application Scenes: Easily replace damaged or worn latches, used for RVs, trucks, trailers, mobile machinery shops, camper, stool boxes etc.

Features

1、Durable Material: The trailer paddle door lock is made of stainless steel with mirror polished surface, rust resistant, can cope well even in harsh outdoor environments. 2、Convenient to Use: The toolbox handle lock offers both locked and unlocked options, perfect for daily reuse, can turn it off and continue using it. 3、Professional Design: The toolbox lock is a single point lock designed to meet the needs of daily use, very suitable for small toolboxes and other small compartment doors. 4、Smooth Operation: The RV toolbox handle latch is smooth to operate and non jamming to use, convenient for daily operation, durable and practical. 5、Wide Application: Trailer paddle door latch handle has wide range of uses, can be used for RVs, trucks, trailers, mobile machinery shops, camper, stool boxes, etc.

Package List

1 x RV Toolbox Handle Latch

Package Dimensions:
Length: 22.00 cm
Width: 10.00 cm
Height: 7.00 cm

Features

1、Reference OE number is GV2S‑66350A and fits for Mazda 6 2006‑2008 2.3L. 2、Ergonomic design, it fits the curve of your finger perfectly for comfortable touch. 3、Constructed by ABS material, durable and long service life. 4、This window regulator switch has high sensitivity and quick response to control the car window. 5、Built to strict quality control standards, design improved for more durability.

Package List

1 x Window Switch

Package Dimensions:
Length: 13.00 cm
Width: 9.00 cm
Height: 8.00 cm

Condition: 100% Brand New

Item Type: Welding Nozzle

Material: Ceramic + Glass + Copper + Rubber

Color: Purple + Brass Color
Application: For WP-17/18/26

Ceramic Nozzle Specification:

1x ( 6.5 mm)1/4in
1 x ( 8.0 mm) 5/16in
1 x (9.50mm) 3/8in
1 x (11.0mm)7/16in
1 x (12.50mm)1/2in

Features

1、Can be applied for WP-17/18/26, to more accurately position and meet your demands. 2、High‑quality ceramic nozzle and copper material electrode clamp, gives superior performance. 3、Has small size in 1/4in, 5/16in, 3/8in, 7/16in, 1/2in, light in weight, is easy and convenient installation. 4、Comes with glass cup, clamp slot, gasket, electrode clamp, gun cap, and front cover, to better meet your needs. 5、Sophisticated production, provides excellent thermal conductivity, and is corrosion resistant

Package List

5 x Welding Nozzle

3 x Electrode Clamp

3 x Clamping Slot

3 x Gun Cap (Long, Medium and Short Respectively)

5 x Glass Cup Set

10 x Seal Ring

2 x Front Cover

Package Dimensions:
Length: 23.00 cm
Width: 16.00 cm
Height: 14.00 cm

Item Type: Steering Knuckle Spindle

Material: Steel Alloy
Thread Size: Approx. 14mm/0.55in

Fitment: Fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc Go Kart ATV Quad Bike

Features

1、Wide Application: Heavy duty steering knuckle spindle fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc Go Kart, ATV and Quad Bike. 2、Direct Replacement: This steering knuckle spindle matches the fit and function of the factory part on specified models, is a reliable replacement part. 3、Ideal Solution: Solve problems such as abnormal suspension noise and difficult steering, and ensure safety when driving under various adverse road conditions. 4、Durable Construction: Precise steel alloy manufacturing, solid filling inside, silver coating on the surface, durable, not rusty, not easy to break, to ensure a long service life. 5、Rigorous Testing: Precision design to match the dimensions of the original components. Strict testing and thorough quality control ensure the service life.

Package List

2 x Steering Knuckle Spindle

Package Dimensions:
Length: 21.00 cm
Width: 21.00 cm
Height: 7.00 cm

Specification

• Excellent quality transmission dipstick with outstanding performance.
• Stainless steel braided housing, high strength, durable for long-lasting use.
• Beautiful and glossy appearance, looks incredibly great insdie any engine bay.
• Flexible and convenient to use, good corrosion resistance.
• Universally fit for Chevy TH400 400 Turbo 400 Transmissions.

Features

1、Excellent quality transmission dipstick with outstanding performance. 2、Stainless steel braided housing, high strength, durable for long-lasting use. 3、Beautiful and glossy appearance, looks incredibly great insdie any engine bay. 4、Flexible and convenient to use, good corrosion resistance. 5、Universally fit for Chevy TH400 400 Turbo 400 Transmissions.

Package Dimensions:
Length: 15.00 cm
Width: 15.00 cm
Height: 15.00 cm

Item Type: Wheel Hub Bearing
Material: Metal
OEM: 40202 JG000, 40202 JG01A, 40202 3DA0A
Fitment:
Fit for Juke Model:
Fit for JUKE (F15) 2010+
1.5 DCI 2010+
1.6 2013+
1.6 2010+
1.6 DIG-T 2010+
1.6 DIG-T 4x4 2010+
1.6 DIG-T NISMO 2013-2014
1.6 DIG-T NISMO 4x4 2013-2014
Replacement for LEAF (ZE0) 2010+
Replacement for Qashqai 2006-2013
Replacement for Koleos 2007-2016

Features

1、Fitment: Fit for JUKE (F15) 2010+; Fit for LEAF (ZE0) 2010+; Fit for Qashqai 2006‑2013; Fit for Koleos 2007‑2016. Please confirm whether your model is applicable before buying. 2、OEM Numbers: 40202 JG000, 40202 JG01A, 40202 3DA0A are the reference part numbers. Double check your OEM part number for proper fitment. 3、Wear Resistance: The hub bearing is made of metal materials, with excellent wear resistance, can withstand the wear of bearings during long term high speed operation. 4、High Load Capacity: Hub bearing can withstand high intensity vehicle suspension system loads, ensuring the safety of the car under heavy loads and special road conditions. 5、Rust Resistance: The wheel bearing adopts anti rust surface treatment, which can effectively resist the rust factors such as moisture and salt spray on the road surface, extend the service life.

Package List

1 x Wheel Hub Bearing

Package Dimensions:
Length: 16.00 cm
Width: 8.00 cm
Height: 3.00 cm

Item Type: Car Charger
Material: Plastic + Tungsten Steel
Function: Car charger, window breaker, seat belt cutter (3-in-1)
A Car Charger Display: LED digital display (real time detection of battery voltage, always protect your safety)
Rated Input: DC 12-24V
Total Output: 80W Maximum (12V)-140W Maximum (24V)
Dual USB Output: 5V4.8A / 5V2.1A
Applicable Mobile Phones: All mobile phones, tablets, game consoles
B Broken Window Function: When in danger, you can use the car charger to break the window directly; built in elasticity, so that the car charger and the cigarette lighter are in full contact without loosening
C Knife Function: Embedded and hidden, the hidden cutter is very sharp, and each product has been tested for safety belt cutting.
Model: 12-24V wide voltage output, compatible with most mainstream cars, SUVs, trucks, etc. on the market

Features

1、Cigarette Lighter Charger: Car charger is suitable for all models, suitable for all mobile phones, tablet computers, game consoles. 2、Window Breaker: Tungsten steel pointed tip, full metal body, harder and stronger, more conducive to breaking windows in an emergency. 3、Hidden Cutter: Hidden cutter can cut the seat belt without worrying about cutting hands, tungsten alloy cutting point, harder. 4、Multiple Protections: Effectively prevent overcurrent, overcharge, overheating and high temperature to protect the safety of your equipment. 5、Real Time Detection: Real time detection of battery voltage, always protect your battery enough to start the car engine.

Package List

1 x Car Charger

Package Dimensions:
Length: 21.00 cm
Width: 14.00 cm
Height: 5.00 cm

Condition: 100% Brand New
Item Type: Trailer Wiring Harness

Part Type: Vehicle Towing Harness Adapters

Fitment Type: Performance/Custom

Vehicle Harness Adapter Type: T-connector

Manufacturer Part Number: 55124

Fitment: Fit for Jeep Wrangler 07‑18

Features

1、Equipped with a standard rear 4‑pin trailer wiring connector, easy to install, for plugging in and towing trailers or accessories. 2、Designed for Jeep Wrangler, which can make sure the easiest installation and the most reliable wiring connection. 3、Easy to grip, ergonomic design, can easily plug in trailer wiring and trailer lights. 4、Tabs on the top and bottom for better grip when plugging into the trailer or unplugging. 5、It can be used to connect trailer tail lights, brake lights and turn signal lights, widely used on various trailers and adds multi‑functional towing options for your vehicle. 6、Equipped with a rubber dust cover to protect it from outdoor, external components and internal corrosion.

Package List

1 x Trailer Wiring Harness

5 x Cable Tie

1 x English Manual

Package Dimensions:
Length: 28.00 cm
Width: 21.00 cm
Height: 10.00 cm

Features

1、Pratical Design: Trailer arms are designed to prevent vehicle collisions and to prevent u‑hooks from striking the front and rear bars. 2、High Quality Material: Shackle hitch receiver is made of high quality steel material, high strength, rustproof, rugged and durable. 3、Hefty Pulling Capacity: Shackle mount trailer hitch provides more stable recovery hitch anchor point, and provides a hefty pulling capacity. 4、Dual Hitch Pin Holes: Flexible to connect the shackle horizontally or vertically, can be connect your tow strap for vehicle recovery. 5、Easy Installation: The installation is easy and convenient, no complicated operation is required, save your time and energy.

Package List

1 x Shackle Hitch Receiver

Package Dimensions:
Length: 16.00 cm
Width: 10.00 cm
Height: 5.00 cm

Item Type: Motorcycle Foot Pegs
Material: CNC Aluminium

Size: Approx. 140 x 38 x 22mm/5.5 x 1.5 x 0.9in
Fitment:

Fit for Vespa GT 125
Fit for Vespa GT 200
Fit for Vespa GT 60 250ie
Fit for Vespa GT 125 L
Fit for Vespa GT 125 L Euro 3
Fit for Vespa GT 200 L
Fit for Vespa GTS 125ie Super
Fit for Vespa GTS 250 ABS
Fit for Vespa GTS 250
Fit for Vespa GTS 300ie Super
Fit for Vespa GTS 250ie
Fit for Vespa GTS 300ie
Fit for Vespa GTS 125 Euro 3
Fit for Vespa GTS150
Fit for Vespa GTS 300ie Super Tour
Fit for Vespa GTV 125
Fit for Vespa GTV 250
Fit for Vespa GTV 300

Features

1、Rear pedal with foldable design, installed on the engine guard to obtain a more comfortable riding position. 2、Made of high‑quality CNC aluminum, corrosion‑resistant, durable and sturdy. 3、Stylish and fashionable pedals, can enhance your motorcycle appearance. 4、Specially fit for Vespa GT 125/200/60 250ie/125 L/200 L, fit for Vespa GTS, fit for Vespa GTV 125/250/300, etc. 5、Easy installation with no additional hardware, a great replacement for the previous old or broken one.

Package List

2 x Motorcycle Foot Pegs

Package Dimensions:
Length: 7.00 cm
Width: 6.00 cm
Height: 3.00 cm

Item Type: ABS Sensor Protection Cover
Material: Aluminum Alloy
Fitment: Replacement for Tenere 700 Rally Edition 2019 - 2024

Features

1、Applicable Model: This motorcycle sensor guard is specifically designed for Tenere 700 Rally Edition 2019‑2024 models, ensuring a perfect fit for optimal protection. 2、Durable Construction: Made from high strength aluminum alloy material, the sensor guard is durable and resistant to wear, not easy to deform and bend. 3、Enhanced Safety: The primary function of the guard is to protect the ABS sensors from external collisions or damages, ensuring the proper functioning of the ABS system. 4、Precision CNC Machining: Anodized surface for a stylish appearance, providing a refined look that enhances the appearance of your vehicle while maintaining its durability. 5、Easy Installation: Convenient to install, the guard does not affect the existing structure of the vehicle. It's a highly practical and effective protection device for your motorcycle.

Package List

1 x Guard
1 x Screw

Package Dimensions:
Length: 20.00 cm
Width: 10.00 cm
Height: 7.00 cm

Item Type: Clutch Slave Cylinder

Material: ABS

OE: 1K0 721 261

Applicable Models:

Replacement for A3 2001-2012
Replacement for Seat Altea XL 2004
Replacement for Ibiza IV 2015+
Replacement for Leon 2005-2012
Replacement for Fabia 2014
Replacement for Octavia II 2007-2013
Replacement for Octavia III 2012+
Replacement for Superb II 2008-2015

Features

1、APPLICABLE MODEL: The clutch cylinder is fit for A3 2001‑2012, replacement for Seat Altea XL 2004, replacement for Ibiza IV 2015+, replacement for Leon 2005‑2012, etc. 2、OE NUMBER: The part numbers for reference is 1K0 721 261. Please confirm whether it is consistent with the OE you need to avoid wrong buying and other problems. 3、EFFICIENT PERFORMANCE: Professionally made with engineer precision, the clutch master cylinder ensures smooth and effective clutch system operation, enhancing your driving comfort and overall experience. 4、HIGH SENSITIVITY: The clutch generator cylinder has sensitive design to ensure absolute precision with every use, providing optimal control of your vehicle. 5、DURABLE MATERIAL: The car clutch master cylinder is made of durable and reliable ABS material, high strength and wear resistant, effectively extending the service life.

Package List

1 x Clutch Slave Cylinder

Package Dimensions:
Length: 21.00 cm
Width: 6.00 cm
Height: 3.00 cm

Item Type: Cylinder Head Studs
Material: Steel
Fitment: Fit for Yamaha YFZ450 Carb Models 2004-2014

Features

1、The cylinder head bolts is fully CNC machined for precision, there is no need to drill or tap, effectively save your time. 2、Nuts are machined from billet high tensile steel and heat treated; and studs are heat treated 180000 PSI aircraft alloy steel. 3、Both nut and stud have rolled threads for the strongest possible threads, and processed by black oxide for enhanced corrosion resistance. 4、The head nuts is 12 point chromoly, and the torque is increased to 35 foot pounds, can solve most of the problems that bother you. 5、The motorcycle cylinder head studs kit is made of high quality steel materials with more reliable and durable performance.

Package List

4 x Stud

4 x Gasket

4 x Nut

Package Dimensions:
Length: 29.00 cm
Width: 20.00 cm
Height: 6.00 cm

Item Type: Front fog lamp eyebrow

Material: ABS
Purpose: Decorative and protective car paint
Installation Method: Paste
Installation Effect: Increase the luster of the original car
Fitment: Replacement for RAV4 2019-2020

Features

1、Applicable Model: Fog lamp trim, replacement for RAV4 2019‑2020, please verity that these trims fit your fog lamp before you purchase. 2、Premium Material: Made of premium ABS plastic with electroplating surface finish. Long durability, and will not bend, break or crack. 3、Protective Trim: Great protection for your car, prevent the surface of your front fog light frame from scratches and dust. 4、Good Decoration: Exquisite workmanship, perfectly decorate your dear fog lamp, will personalize and upgrade your car appearance. 5、Non Destructive Installation: Direct paste installation, it won't scrape the paint off, easy to stick and conforms to the original car.

Package List

2 x Fog Lamp Eyebrow

Package Dimensions:
Length: 10.00 cm
Width: 9.00 cm
Height: 4.00 cm

Features

1、The input voltage of the product is 12-24V, and all car of 12-24V can be installed and used. 2、With LED indicator, makes the charge faster and safer. 3、Can be used in an environment with a minimum temperature of -25℃ and a maximum temperature of 80℃. 4、Dual USB, external equipment for power supply, power your phone, tablet, etc. 5、Applicable to the installation and use of high-end large-scale vehicles such as ships, yachts, RVs, buses, etc.

Package Dimensions:
Length: 15.00 cm
Width: 12.00 cm
Height: 3.00 cm

Features

1、Application: Can be used for daytime running light, turn light, fog lamp, headlight, width lamp, speaker decoration and so on. 2、Stable and Reliable: With a constant current regulator, it can be connected to 9-36V DC voltage, and it will not fail due to voltage fluctuations. It helps to extend the life of the product during operation. 3、Size: The halo ring with the outer dimension about 80mm / 3.1in, the inner side about 65mm / 2.6in, the wire length 650mm / 25.6in. Please make sure the size of the rings matches your car's headlight before ordering. 4、High Quality: These led halo ring is made of durable plastic material, sturdy, reliable, with uniform illumination, no glare, no eye injury, providing better driving experience. 5、Easy Installation: Including 2pcs halo ring lights of the package. Just plug and play, easy to install and help you have a cool halo ring lighting effect.

Package List

2 x Halo Ring Light

Package Dimensions:
Length: 28.00 cm
Width: 12.00 cm
Height: 9.00 cm

Features

1、With bending degree indicator, capable of bending the copper tube in a wide range up to 180 degree 2、Just one tool works on three sizes of tubing 1/4" 5/16" and 3/8", practical and economical 3、Level action permits easy bending without collapsing the tubing 4、Made of aluminum alloy, heavy duty, durable in using and very convenient 5、Bending tool for copper tubes, aluminium tubes and stainless steel tubes, ideal for smaller pipe diameter in the automotive heating, air conditioning and ventilation systems, installations, craft and hobby

Package Dimensions:
Length: 10.00 cm
Width: 2.00 cm
Height: 2.00 cm

Specification

• Adopt special electrode material, long life and provide strong spark.
• Improved fuel efficiency and reduce emissions.
• Easy to install, direct replacement for the original one.
• We offer IK16 5303, IK20 5304, IK22 5310 to meet your different needs.

Features

1、Brand new spark plug with high performance electrode head 2、Adopt special electrode material, long life and provide strong spark 3、Improved fuel efficiency and reduce emissions 4、Easy to install, direct replacement for the original one 5、We offer IK16 5303, IK20 5304, IK22 5310 to meet your different needs

Package Dimensions:
Length: 12.00 cm
Width: 11.00 cm
Height: 4.00 cm

Item Type: Silicone Blanking Cap
Material: Silicone
Inner Diameter: Approx. 30mm/1.2in
Application: It is suitable for all 30mm automotive intake vacuum flexible pipes, BOV pipes, vent pipes, oil collection pipes, radiator tank pipes, radiator pipes, intercooler pipes, booster controller pipes or other industrial applications.

Features

1、Silicone Cap: The cap is made of silica gel, which can be used for a long time and has high durability to ozone, water, weather and extreme temperature. 2、Universal: Suitable for intake vacuum flexible pipe, BOV pipe, oil gathering pipe, radiator pipe, intercooler pipe, or other industrial applications. 3、5pcs in Tatal: The package contains 5pcs intake vacuum hose bungs, with 30mm/1.2in inner diameter, better to meet your needs. 4、Rigorous Testing: The cap is tested for reliability, durability and performance before leaving the factory to ensure its quality and stability. 5、Long Durability: Professional manufacturing, intake vacuum hose bung has high performance, strong reliability, long use time.

Package List

5 x Silicone Blanking Cap

Package Dimensions:
Length: 44.00 cm
Width: 26.00 cm
Height: 12.00 cm

Item Type: Front Door Storage Pockets

Material: ABS

Applicable Models:

Replacement for Ford Bronco 4 Door 2021‑2022(front door)

Features

1、Vehicles Compatibility: Door storage pockets is replacement for Ford Bronco 4 Door 2021‑2022, which is made according to the prototype of the car. 2、Strong Inclusiveness: The box can effectively organizes your items to make your car interior more tidy, suitable to store various sizes of tissues, bottled water, cell phone, sunglasses, hand cream, wallet, keys, etc. 3、Expansion Design: Expand storage space and organize space, no longer worry about original nets sagging and items falling, provide you with a convenient car life. 4、Dynamic Interior: Provide a classy and fashion decoration for your car, highlight the personality, and makes the car more beautiful. 5、Screws Installation: Use the screws of the original door net, which don't drill any holes and more stable and firm, safe and convenient.

Package List

2 x Storage Boxs

6 x Sound insulation Accessories

Package Dimensions:
Length: 31.00 cm
Width: 22.00 cm
Height: 8.00 cm

Specification

• Overmolded, not easily broken, sturdy, and components mounted to standard exhaust to ensure a good connection to your vehicle.
• Used to extend a length of pipe in equal proportions so that the pipe diameter is the same rather than tapered.
• Ensure perfect fit, no leakage, and remove dents and nicks, securely attached, and not easy to loosen.
• Blow molds are available to create molds to suit your needs.
• Made of high-quality high-carbon steel, it has high strength and durability, and high-quality products provide you with high quality assurance.

Features

1、Overmolded, not easily broken, sturdy, and components mounted to standard exhaust to ensure a good connection to your vehicle. 2、Used to extend a length of pipe in equal proportions so that the pipe diameter is the same rather than tapered. 3、Ensure perfect fit, no leakage, and remove dents and nicks, securely attached, and not easy to loosen. 4、Blow molds are available to create molds to suit your needs. 5、Made of high-quality high-carbon steel, it has high strength and durability, and high-quality products provide you with high quality assurance.

Package Dimensions:
Length: 51.00 cm
Width: 15.00 cm
Height: 8.00 cm

Item Type: Front Right Lower Control Arm
Material: Alloy Steel
OEM: 31121141718
Fitment:
Replacement for 5 Series E39 1995-2003
Replacement for Z8 E52 1998-2003 

Features

1、OEM numbers for reference: 31121141718, replacement for 5 Series E39 Z8 E52. 2、Used to enhance the ride comfort and handling stability of the car, strong practicality. 3、Made of premium alloy steel, it has strong rigidity, high strength and long service life. 4、The installation is simple and does not require complicated operations, convenient to use. 5、Original standard, direct replacement for the old or damaged front right lower control arm.

Package List

1 x Control Arm

1 x Nut

Package Dimensions:
Length: 12.00 cm
Width: 9.00 cm
Height: 2.00 cm

Item Type: Motorcycle Carburetor Repair Kit

OEM: 18-5060
Material: Rubber, Metal
Fitment: Replacement for Suzuki Katana GSX600F 1990-1997
Replacement for Suzuki Katana GSX750F 1989-1997
Replace for Katana K&L 18-5060

Features

1、Applicable Model: The carburetor repair kit is replacement for Suzuki Katana GSX600F GSX750F. Please confirm whether it is consistent with the product you want before buying to avoid unnecessary return. 2、OE Number: The part number for reference is 18‑5060. Please confirm whether it is consistent with the OE you need to avoid wrong buying and other problems. 3、Durable Material: The carburetor rebuild kit is made of durable and reliable material, high strength and wear resistant, having long service time. 4、Easy to Install: The carb repair kit has a simple installation, convenient and time saving, don't need too much tools or complicated steps, easy to use. 5、Ideal Replacement: The carburetor carb rebuild kit is a perfect replacement for car repairing, can directly replace the old and broken accessory, ensuring the normal operation of your car.

Package List

4 x Motorcycle Carburetor Repair Kit (26Pcs)

Package Dimensions:
Length: 8.00 cm
Width: 7.00 cm
Height: 6.00 cm

Item Type: Idle Air Control Valve

Material: ABS and metal alloy

Part Number: 18117 84380, 18117 84380 000

Application:

Replacement for Suzuki Outboard 50HP DF 50TLK4 Beginning VIN 05001F-421001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40QHLK2 Beginning VIN 04001F-251001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TSY Beginning VIN 04001F-030001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK5 Beginning VIN 05001F-510001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50QHLK2 Beginning VIN 05001F-251001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40QHLX Beginning VIN 04001F-971001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK2 Beginning VIN 05001F-251001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40QHLK1 Beginning VIN 04001F-151001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40QHLY Beginning VIN 04001F-030001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLX Beginning VIN 04001F-971001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK5 Beginning VIN 04001F-510001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK8 Beginning VIN 05001F-880001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK9 Beginning VIN 05001F-980001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK3 Beginning VIN 05001F-371001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK10 Beginning VIN 05002F-010001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK2 Beginning VIN 04001F-251001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TSX Beginning VIN 04001F-971001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK1 Beginning VIN 05001F-151001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK10 Beginning VIN 04002F-010001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK7 Beginning VIN 05001F-780001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK6 Beginning VIN 05001F-680001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK4 Beginning VIN 04001F-421001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLY Beginning VIN 05001F-030001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLX Beginning VIN 05001F-971001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK3 Beginning VIN 04001F-371001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK8 Beginning VIN 04001F-880001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50QHLK1 Beginning VIN 05001F-151001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLY Beginning VIN 04001F-030001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK6 Beginning VIN 04001F-680001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50QHLY Beginning VIN 05001F-030001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK9 Beginning VIN 04001F-980001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK1 Beginning VIN 04001F-151001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 40HP DF 40TLK7 Beginning VIN 04001F-780001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50QHLX Beginning VIN 05001F-971001 Silencer (DF40:680712%,DF50:681339%)
Replacement for Suzuki Outboard 50HP DF 50TLK4 Beginning VIN 05001F-421001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40QHLK2 Beginning VIN 04001F-251001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TSY Beginning VIN 04001F-030001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK5 Beginning VIN 05001F-510001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50QHLK2 Beginning VIN 05001F-251001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40QHLX Beginning VIN 04001F-971001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK2 Beginning VIN 05001F-251001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TLX Beginning VIN 04001F-971001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40QHLY Beginning VIN 04001F-030001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40QHLK1 Beginning VIN 04001F-151001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TLK5 Beginning VIN 04001F-510001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK8 Beginning VIN 05001F-880001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TLK2 Beginning VIN 04001F-251001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK3 Beginning VIN 05001F-371001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK9 Beginning VIN 05001F-980001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK10 Beginning VIN 05002F-010001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TSX Beginning VIN 04001F-971001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 40HP DF 40TLK10 Beginning VIN 04002F-010001 Silencer (Model:01%06)
Replacement for Suzuki Outboard 50HP DF 50TLK1 Beginning VIN 05001F-151001 Silencer (Model:01%06)

Features

1、Strong Compatibility: Idle air control valve is replacement for Suzuki Outboard 50HP DF 50TLK4, replacement for Suzuki Outboard 40HP DF 40QHLK2, replacement for Suzuki Outboard 40HP DF 40TSY, etc. 2、Part Number: IAC valve assy replace part number are 18117 84380, 18117 84380 000. Please check the part numbers whether it suits your vehicle before purchasing. 3、Main Function: The outboard IAC valve is used to regulate the air flow into the engine and the opening of the intake valve, so that the engine can maintain a stable and suitable speed in the idle state. 4、Durable Construction: High strength ABS and metal alloy construction for maximum durability, high work efficiency and stable performance. 5、Ideal Replacement: Exquisite workmanship and perfect fit to meet your needs, allowing you to directly replace the original damaged one.

Package List

1 x Idle Air Control Valve

Package Dimensions:
Length: 16.00 cm
Width: 9.00 cm
Height: 6.00 cm

Specification

• Compact and lightweight design, easy to install and carry.
• Made of high grade stainless steel, anti-rust and not easy to deform, durable for long time use.
• Screw thread interface, easy to disassemble, repair and replace.
• Comes with stainless strainer at the bottom, make the extracted diesel (or water) cleaner.
• The wire is 3 meters long and the diameter of the pump mouth is 16 mm.
• Suitable for large harvester, farm machinery, engineering machinery, big wheel tractor and so on.

Features

1、Compact and lightweight design, easy to install and carry 2、Made of high grade stainless steel, anti-rust and not easy to deform, durable for long time use 3、Screw thread interface, easy to disassemble, repair and replace 4、Comes with stainless strainer at the bottom, make the extracted diesel (or water) cleaner 5、Suitable for large harvester, farm machinery, engineering machinery, big wheel tractor and so on

Package Dimensions:
Length: 27.00 cm
Width: 8.00 cm
Height: 4.00 cm

Features

1、Replacement for GMC Sierra 2007‑2018, specificly designed for pickup, with deceleration compression function. 2、Suitable for any object, such as car lid, trailer, bed, RV under bed storage, trap door, etc. 3、The lid has a maximum angle of 90 degrees for doors/lid that is less than 20in wide and weight between 45 and 90 pounds. 4、Each damper can carry a weight of 67 pounds tailgate, or two damper using together can bearing 134 pounds. 5、The lid will be opened gently, this damper is a good choice for support the lid and keep it open.

Package List

2 x Bracket

1 x Damper

1 x Screw

1 x Expansion Bolt

Package Dimensions:
Length: 45.00 cm
Width: 24.00 cm
Height: 12.00 cm

Item Type: Fog Light Cover Grille

Material: ABS
OEM Number: 7P68546619B9 (Left), 7P68546629B9 (Right)
Color: Textured Black
Fitment:
Fit for 7P Pre-facelift 2011-2015

Features

1、VEHICLE FITMENT: Designed specifically for 7P Pre‑facelift 2011‑2015. Enhance the look of your vehicle with this cover, it provides a seamless fit and adds a touch of style. 2、OEM NUMBER: The replacement part number to the right of the fog light frame is 7P68546629B9, left is 7P68546619B9. It meets or exceeds OEM standards. 3、IMPROVED VISIBILITY: The fog light cover is designed to accommodate fog lights, helping to improve visibility in low light conditions. Stay safe on the road with enhanced lighting capabilities. 4、RELIABLE PROTECTION: This cover acts as a barrier, protecting your fog lights from road debris, rocks, and other hazards. Keep your fog lights in pristine condition with added protection. 5、EASY INSTALLATION: This fog lamp trim is designed for a hassle free installation. Simply remove the old grille and replace it with this new one. No modifications or special tools required.

Package List

2 x Fog Light Frame (Left and Right)