EBADA
$2.89
Package Dimensions:
Length: 8.00 cm
Width: 6.00 cm
Height: 2.00 cm
Item Type: Thread Inserts
Material: SUS304
Model: M6x1x2.5D
Thread Specification: M6x1x2.5(mm)
Length After Installation: Approx. 15mm / 0.6in
Number of Turns Before Installation: 12.2
Outside Diameter Before Installation: Approx. 7.5 ~ 7.9mm / 0.3 ~ 0.3in
Diameter of Drilling Drill Bit for Installation: Approx. 6.3mm / 0.2in
Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.
How to Use:
1. Drilling
Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.
2. Tapping
3. Installation
Put the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the "T" type slotting simple tool to install; Note: During the installation and screwing process of the thread inserts, there should be no pressing in the vertical direction to prevent jumping teeth. The correct method is slowly screw in the direction of thread rotation.
4. Remove the handle (break off the mounting handle)
Use a breaker to break the mounting handle. Use about 200g of coconut to hit the breaker instantly, and the handle can be removed. Do not use the mounting wrench to rotate in the opposite direction. Do not break the mounting handle. This situation is very easy. As a result, the tail shank was broken and the wire was pulled out.
5. Unscrew
When installation problems occur during the installation of the wire thread insert (such as jumping teeth), the thread insert needs to be removed, and a special sleeve remover should be used to remove the wire thread insert.
1、Fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials to form a high‑strength, wear‑resistant, high‑accuracy standard female thread 2、Threaded insert can be used as a repair method when a thread error occurs or a damaged female threaded hole is repaired. Repairing the threaded hole in a cost‑effective manner 3、Thread inserts can be used to convert between metric and inch thread holes, which is convenient and fast 4、High‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners 5、Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can improve thread strength and wear resistance significantly
100 x Thread Inserts
EBADA
$2.89
The 5W power is great for use in the home whether you want to listen to music after a long day at work or watch a film on your laptop. With its practical integrated strap, you can attach the speaker to a backpack and take it to the park on a sunny spring day.
Estimated delivery between December 03 and December 05.
Price Match
We check our prices every day to ensure we can bring you the best price possible. In the unlikely case that you have found a cheaper price then please contact us on support@omnithemes.com and we'll do our best to answer your query right away!
Multibuy Discounts
Planning to purchase multiple electrical appliances or household electronics?
We offer exclusive multibuy discounts with customised package pricing when you order two or more products together.
Call us on (+84) 123 4567 or visit our Multibuy Discounts page for full details and to request your tailored quote today.
Finance
We've partnered up with Dopple!
Why use Dopple?
How does it work?
Delivery Information
The standard delivery from Monday to Friday is FREE
The express delivery from Monday to Friday is £14.99
The saturday delivery is £29.99
The sunday delivery is £34.99
Flexible Delivery
We know that you expect your goods to be delivered promptly and efficiently. That’s why we have made it a priority at electricshop.com to deliver your goods as quickly as possible using our fast, efficient delivery service which comes direct to your home and is FREE for most items!
- We deliver seven days a week
- Standard deliveries are despatched via specialist carriers and are normally delivered within 3-5 working days.
- Express deliveries are dispatched same day (if ordered before 14:30) for delivery within 1-2 working days.
- For weekend deliveries, orders need to be placed by 14:30 on Friday.
- Larger Items are despatched using our team of specialist nationwide carriers. You will be contacted within 48 hours verifying your order and an estimated delivery date.
- Deliveries direct from manufacturers or suppliers can take a little longer but we will keep you informed and updated.
$2.89
$2.89
Flattering fit
Enjoy the flattering fit and butterfly soft feeling
Flattering fit
Enjoy the flattering fit and butterfly soft feeling
Package Dimensions:
Length: 8.00 cm
Width: 6.00 cm
Height: 2.00 cm
Item Type: Thread Inserts
Material: SUS304
Model: M6x1x2.5D
Thread Specification: M6x1x2.5(mm)
Length After Installation: Approx. 15mm / 0.6in
Number of Turns Before Installation: 12.2
Outside Diameter Before Installation: Approx. 7.5 ~ 7.9mm / 0.3 ~ 0.3in
Diameter of Drilling Drill Bit for Installation: Approx. 6.3mm / 0.2in
Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.
How to Use:
1. Drilling
Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.
2. Tapping
3. Installation
Put the wire screw sleeve into the installation wrench (figure 5 on the right), insert the wire screw sleeve installation tail handle into the guide rod groove of the installation wrench, and turn the handle of the installation wrench to screw the wire screw sleeve into the screw hole. For installation of M14x2 or more phase thread thread inserts, you can use the "T" type slotting simple tool to install; Note: During the installation and screwing process of the thread inserts, there should be no pressing in the vertical direction to prevent jumping teeth. The correct method is slowly screw in the direction of thread rotation.
4. Remove the handle (break off the mounting handle)
Use a breaker to break the mounting handle. Use about 200g of coconut to hit the breaker instantly, and the handle can be removed. Do not use the mounting wrench to rotate in the opposite direction. Do not break the mounting handle. This situation is very easy. As a result, the tail shank was broken and the wire was pulled out.
5. Unscrew
When installation problems occur during the installation of the wire thread insert (such as jumping teeth), the thread insert needs to be removed, and a special sleeve remover should be used to remove the wire thread insert.
1、Fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials to form a high‑strength, wear‑resistant, high‑accuracy standard female thread 2、Threaded insert can be used as a repair method when a thread error occurs or a damaged female threaded hole is repaired. Repairing the threaded hole in a cost‑effective manner 3、Thread inserts can be used to convert between metric and inch thread holes, which is convenient and fast 4、High‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners 5、Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can improve thread strength and wear resistance significantly
100 x Thread Inserts
Authencity Guaranteed
We only sell authentic products from verified brand partners and retail partners globally.
